| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 510 x 400 x 660 mm | |
|---|---|---|
| Tapered leg height | 100 mm | |
| Individual drawer front height | 240 mm | |
| Left side panel thickness | 18 mm | |
| Drawer internal usable dimensions | 450 x 340 x 104 mm | |
| Tabletop thickness | 25 mm | |
| Undercabinet floor clearance | 100 mm | |
| Drawer gap between front panels | 3 mm | |
| Frame rail width (front/side) | 30 mm | |
| Side Rail Thickness | 40 mm | |
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| Static tabletop load capacity | 36 kg | |
|---|---|---|
| Total storage volume | 31.8 L | |
| Recommended maximum user weight for edge seating | 80 kg | |
| Drawer slide cycle durability | 30000 open/close cycles | |
| Surface finish abrasion resistance | 2000 cycles | |
| Bed Static Load Reference | 400 kg | |
| Per-slat Load Reference | 60 kg | |
| Recommended Procurement Warranty | Frame 10 years; hardware 5 years; upholstery 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop surface | Light oak wood veneer or solid oak, matte clear lacquer finish | |
|---|---|---|
| Left side panel | Fluted vertical-grooved light oak-toned wood panel, 18mm thick | |
| Structural frame (top/bottom/right rails) | Solid oak or oak-veneer engineered wood, 30mm wide | |
| Drawer fronts | MDF or engineered wood core, matte white PU paint finish | |
| Support legs | Solid tapered oak wood legs, 40mm top diameter, rounded foot | |
| Drawer box construction | 12mm thick plywood or MDF drawer sides, smooth internal finish | |
| Drawer slides | 3-section side-mounted cold-rolled steel slides, zinc-plated finish | |
| Back panel | 3mm thick hardboard or MDF back panel, fixed with staples | |
| Slat Thickness | 15 mm bent plywood or solid timber | |
| Primary Connector Specification | Reference M8-M10 bolts with at least 2 fixing points per corner | |
| Reference Finish / Color Count | Recommended 6timber/upholstery options |
Adjustment / rotation / tilt / mobility / storage features
| Drawer operation | Handleless push-to-open or recessed-grip drawers, full 3/4 extension travel | |
|---|---|---|
| Storage configuration | Two equal-height stacked drawers for enclosed bedside item storage | |
| Surface utility | Flat level tabletop for placing lamps, phones, books or small decor items | |
| Floor access | 100mm under-unit clearance allows robotic vacuum cleaning beneath the unit | |
| Anti-tip safety | Included wall anchor hardware secures unit to wall to prevent tipping | |
| Drawer alignment | Adjustable slide mounting screws allow 2mm front alignment adjustment | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Residential bedroom bedside placement | Positioned adjacent to single, double or queen size beds for nightly essentials access | |
|---|---|---|
| Small living room end table use | Placed next to sofas or armchairs for remote, drink and small item storage | |
| Narrow entryway console use | Positioned in small entryways for keys, mail and entry accessory storage | |
| Scandinavian/Japanese minimalist interiors | Matches light wood and white color palettes with clean, handleless lines | |
| Youth or guest bedroom furnishing | Compact size and enclosed storage suit smaller secondary bedrooms |
EU Market Access Requirements* EN Standards
| EN 14749:2016 | Safety and strength requirements for domestic storage furniture, applicable for structural validation | |
|---|---|---|
| EN 71-3:2019+A1:2021 | Migration of certain elements in furniture surfaces, required for child-safe bedroom use | |
| EN 12521:2015 | Strength, durability and safety requirements for domestic seating and storage furniture |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for dimensional and structural acceptance | |
|---|---|---|
| GB 18584-2001 | Limit of harmful substances in wooden furniture, required for indoor air quality compliance | |
| GB/T 4893.4-2013 | Surface wear resistance test for furniture finishes, applicable for finish durability verification |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for dimensional and structural acceptance; 2. GB 18584-2001: Limit of harmful substances in wooden furniture, required for indoor air quality compliance; 3. GB/T 4893.4-2013: Surface wear resistance test for furniture finishes, applicable for finish durability verification; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
