Integrated Tea Conference Table with Host Chair and Two Stools (model ENGC-TBL-2400-TEA-SET-3S) is listed under Office Kung Fu Tea Table. Dimensions: 2400 × 900 × 750 mm. Materials: 25 mm engineered-wood substrate with dark walnut wood veneer or wood-grain laminate and 50 mm built-up edge. Load capacity: 160 kg. Product Features: Modern,luxury,mixed,metal,and,wood,upholstered,seating,integrated,tea,4-person,configuration. This page consolidates 6 groups of specifications and GB / EN / ANSI/BIFMA standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Brand | XIANGSHI | Model | ENGC-TBL-2400-TEA-SET-3S |
| Overall dimensions (W × D × H) | 2400 × 900 × 750 mm | Finished Seat Cushion Thickness | 90 mm |
| Backrest Padding Thickness | 70 mm | Lumbar Support Zone Height | 240 mm |
| Clear Width Between Armrests | 540 mm | Table total distributed load | 160 kg |
| Tabletop point-load reference | 40 kg over 200 x 200 mm | Round pedestal static support | 80 kg |
| Panel-base static support | 80 kg | Host chair rated occupancy | 135 kg |
| Stool rated occupancy per piece | 120 kg | Table seating capacity | 4 persons |
| Table set product weight | 165 kg | Surface durability target | 50000 abrasion cycles for seating fabric and Class 1A wear-rated table laminate |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | Tabletop substrate and finish | 25 mm engineered-wood substrate with dark walnut wood veneer or wood-grain laminate and 50 mm built-up edge |
| Edge and trim | Brushed stainless steel or silver-anodized metal edge trim following the rounded perimeter | Round pedestal | Brushed stainless steel cylindrical column with lower circular shelf and recessed ambient light strip |
| Rectangular-end support | Satin stainless steel panel and cylindrical column with arched cutaway profile | Host chair upholstery | Sage-green woven fabric or leather-grain upholstery over foam padding with vertical channel back |
| Stool upholstery and shell | Sage-green padded saddle seats on matte-black tapered molded shells with open support cutouts | Integrated tea-service layout | Long flush inset deck supports a brewing tray, teaware, drain area, and four cup positions on the 1200 x 280 mm service zone |
| Dual-end support structure | Round pedestal stabilizes the serving end while the arched panel base supports the meeting end and leaves knee access on the long side | Fixed host seating position | Fully upholstered armchair with curved channel back and black arms is positioned at the round end for face-to-face tea hosting |
| Peripheral guest seating | Two backless saddle stools slide under the rectangular top and provide compact seating for guests | Total gross weight | 185 kg |
| Reference Package Count | 1 set / 2 cartons | Reference Assembly Time | 40 minutes per set |
| Reference Carton Dimensions | 850× 420× 720 mm | Reference Packaged Gross Weight | 23 kg/set |
| Reference Carton Volume | 0.26 m³/set | Executive tea meeting room | Suits a 2400 mm integrated hospitality table where a host serves tea while three guests meet around the rectangular side |
| High-end reception or VIP lounge | Fits premium office reception, club lounge, or showroom areas requiring metal-and-wood presentation, fixed host seating, and compact guest stools | — | — |
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 2400 × 900 × 750 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Table total distributed load | 160 kg | |
|---|---|---|
| Tabletop point-load reference | 40 kg over 200 x 200 mm | |
| Round pedestal static support | 80 kg | |
| Panel-base static support | 80 kg | |
| Host chair rated occupancy | 135 kg | |
| Stool rated occupancy per piece | 120 kg | |
| Table seating capacity | 4 persons | |
| Table set product weight | 165 kg | |
| Surface durability target | 50000 abrasion cycles for seating fabric and Class 1A wear-rated table laminate | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Tabletop substrate and finish | 25 mm engineered-wood substrate with dark walnut wood veneer or wood-grain laminate and 50 mm built-up edge | |
|---|---|---|
| Edge and trim | Brushed stainless steel or silver-anodized metal edge trim following the rounded perimeter | |
| Round pedestal | Brushed stainless steel cylindrical column with lower circular shelf and recessed ambient light strip | |
| Rectangular-end support | Satin stainless steel panel and cylindrical column with arched cutaway profile | |
| Host chair upholstery | Sage-green woven fabric or leather-grain upholstery over foam padding with vertical channel back | |
| Stool upholstery and shell | Sage-green padded saddle seats on matte-black tapered molded shells with open support cutouts |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Integrated tea-service layout | Long flush inset deck supports a brewing tray, teaware, drain area, and four cup positions on the 1200 x 280 mm service zone | |
|---|---|---|
| Dual-end support structure | Round pedestal stabilizes the serving end while the arched panel base supports the meeting end and leaves knee access on the long side | |
| Fixed host seating position | Fully upholstered armchair with curved channel back and black arms is positioned at the round end for face-to-face tea hosting | |
| Peripheral guest seating | Two backless saddle stools slide under the rectangular top and provide compact seating for guests |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Total gross weight | 185 kg | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Executive tea meeting room | Suits a 2400 mm integrated hospitality table where a host serves tea while three guests meet around the rectangular side | |
|---|---|---|
| High-end reception or VIP lounge | Fits premium office reception, club lounge, or showroom areas requiring metal-and-wood presentation, fixed host seating, and compact guest stools |
EU Market Access Requirements* EN Standards
| Office furniture strength standard | EN 15372:2016 recommended for non-domestic table strength, durability, and stability acceptance. | |
|---|---|---|
| Office seating safety standard | EN 1335:2018 recommended if the host chair and stools are supplied for commercial office use. | |
| Upholstered furniture flammability | EN 1021:2014 cigarette ignition test recommended for fabric and foam seating components. | |
| Surface emission specification | EN 16516:2017 VOC emission test recommended for enclosed meeting and hospitality rooms. |
US and Canada office-furniture standards
| North America procurement and testing reference | Recommended references: ANSI/BIFMA X5.5 |
|---|
Standards applicable to China-market projects
| Formaldehyde emission specification | GB/T 39600E1 limit recommended for engineered-wood tabletop substrate | |
|---|---|---|
| Furniture structural strength test | GB/T 10357.1table strength and load tests recommended for commercial procurement verification. | |
| Furniture durability test | GB/T 10357.7table impact and durability testing recommended for conference and tea-room use. | |
| Upholstered furniture labeling | GB/T 31900recommended for fabric, foam, and permanent-care labeling on chair and stools. |
This product must meet the following technical requirements: 1. Formaldehyde emission specification: GB/T 39600E1 limit recommended for engineered-wood tabletop substrate; 2. Furniture structural strength test: GB/T 10357.1table strength and load tests recommended for commercial procurement verification.; 3. Furniture durability test: GB/T 10357.7table impact and durability testing recommended for conference and tea-room use.; 4. Upholstered furniture labeling: GB/T 31900recommended for fabric, foam, and permanent-care labeling on chair and stools.; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp