| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set footprint | 3100 x 2200 x 900 mm | |
|---|---|---|
| Table overall dimensions | 2500 x 1000 x 750 mm | |
| Single chair overall dimensions | 580 x 600 x 900 mm | |
| Dining seat height | 480 mm | |
| Chair arm height from floor | 640 mm | |
| Knee clearance under table apron | 680 mm | |
| Table top overhang per side | 50 mm | |
| Table cross stretcher height | 150 mm | |
| Chair seat width | 500 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Total set packaged gross weight | 120 kg | |
|---|---|---|
| Per-chair static load capacity | 159 kg | |
| Seating capacity | 8 adults | |
| Wicker UV resistance rating | 3000 hours | |
| Frame rust protection lifespan | 3 years | |
| Cushion foam density | 35 kg/m³ | |
| Cushion thickness | 50 mm | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Table and chair frame | 2.0mm thick powder-coated rust-resistant aluminum tubing | |
|---|---|---|
| Woven exterior | Brown all-weather PE resin wicker, handwoven over frame | |
| Table top surface | Dark flat weatherproof composite hard surface | |
| Seat cushion core | High-density quick-dry polyurethane foam | |
| Cushion covers | 210D waterproof polyester fabric with zippered closure | |
| Chair foot caps | Silver chrome-finish plastic non-marking caps | |
| Table base bracing | Cross-stretcher metal support between dual wicker-clad pedestals | |
| Hardware fittings | Stainless steel rust-resistant assembly bolts and screws | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Dining seating configuration | 8 symmetrically placed armchairs around rectangular table | |
|---|---|---|
| Assembly requirement | Knock-down assembly with included hardware and instructions | |
| Chair stackability for storage | Chairs nest vertically for off-season storage | |
| Leveling adjustment | Rotatable foot caps to adjust for uneven outdoor patio surfaces | |
| Cushion maintenance | Zippered removable cushion covers for machine washing | |
| Weather resistance | Waterproof, UV-stabilized, rust-proof construction for full outdoor exposure | |
| Table center umbrella compatibility | 50mm diameter center umbrella hole with cap | |
| Surface cleanability | Wipe-clean table top and wicker surface with mild detergent | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Residential patio installation | Suitable for backyard, garden, waterfront or poolside dining areas | |
|---|---|---|
| Hospitality outdoor dining | Suitable for restaurant, cafe or hotel terrace seating for 8 guests | |
| Leisure dining use case | Designed for family meals, outdoor parties and casual gathering events | |
| Climate suitability | Works in coastal, high-humidity and high-sun exposure environments | |
| Recommended complementary accessories | Pairs with 2.7m patio umbrella, outdoor dining tableware and weatherproof furniture covers | |
| Surface requirement | Suitable for flat paved, stone, concrete or wood deck outdoor surfaces | |
| Storage recommendation | Chairs stack for compact off-season storage in sheds or covered areas |
EU Market Access Requirements* EN Standards
| EN 581-1:2017 | Outdoor furniture, seating and tables for domestic use, general safety requirements | |
|---|---|---|
| EN 581-2:2019 | Outdoor furniture, mechanical safety requirements for dining seating | |
| EN 581-3:2019 | Outdoor furniture, mechanical safety requirements for dining tables |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden and rattan outdoor furniture, applicable for structural safety | |
|---|---|---|
| GB 18584-2001 | Indoor decoration materials, limit of harmful substances in wooden furniture, applies to low-VOC materials | |
| GB/T 16422.3-2014 | Plastics laboratory light source exposure test method, applicable for PE wicker UV resistance validation |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden and rattan outdoor furniture, applicable for structural safety; 2. GB 18584-2001: Indoor decoration materials, limit of harmful substances in wooden furniture, applies to low-VOC materials; 3. GB/T 16422.3-2014: Plastics laboratory light source exposure test method, applicable for PE wicker UV resistance validation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
