| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set footprint (deployed) | 1220 x 1220 x 838 mm | |
|---|---|---|
| Tabletop dimensions | 610 mm diameter x 730 mm height | |
| Folded table dimensions | 610 x 75 x 840 mm | |
| Chair overall dimensions (deployed) | 495 mm W x 584 mm D x 838 mm H | |
| Chair seat dimensions | 420 mm W x 413 mm D x 457 mm floor-to-seat height | |
| Chair backrest dimensions | 420 mm W x 178 mm H | |
| Slat thickness (table/chair surfaces) | 12 mm | |
| Steel frame tube diameter | 16 mm | |
| Folded chair dimensions | 495 x 80 x 900 mm | |
| Knee clearance under table | 635 mm | |
| Foot glide diameter | 20 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Set net weight | 20.4 kg | |
|---|---|---|
| Chair static weight capacity | 150 kg per chair | |
| Tabletop static weight capacity | 50 kg | |
| Slat surface drainage gap | 8 mm | |
| Finish weather resistance | Powder-coated frame resists rust and scratching for outdoor use | |
| Recommended user count | 2 adults | |
| Folding cycle durability | 1000 open/close cycles | |
| Warranty period | 1 year limited warranty | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop slats | Wood-look composite slats with light natural finish | |
|---|---|---|
| Chair seat/back slats | Wood-look composite horizontal slats with matching light finish | |
| Structural frame | White powder-coated round steel tubing | |
| Folding joints | Steel rivet hinges at frame pivot points | |
| Foot glides | Molded plastic non-scuff caps | |
| Frame cross bracing | 16 mm diameter steel X-braces under seats and table | |
| Surface coating (metal) | UV-stabilized white powder coat | |
| Slat fasteners | Stainless steel screws securing slats to frame | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm | |
| Tilt Mechanism Plate Thickness | 2.5 mm cold-rolled steel |
Adjustment / rotation / tilt / mobility / storage features
| Folding mechanism (table) | X-brace leg frame folds flat without tools | |
|---|---|---|
| Folding mechanism (chairs) | Cross-braced leg frame folds flat for storage | |
| Drainage design | Spaced gaps between horizontal slats prevent water pooling | |
| Floor protection | Plastic glides on all leg ends prevent scratching deck or tile surfaces | |
| Portability | Lightweight construction allows single-person carry and repositioning | |
| Storage configuration | Folded units stack to 100 mm total thickness | |
| Surface maintenance | Smooth slat surfaces wipe clean with mild soap and water | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
| Small balcony use | Compact footprint fits apartment balconies for two-person casual seating | |
|---|---|---|
| Garden patio placement | Weather-resistant construction for open-air use on wood or tile decks | |
| Compact outdoor dining | Suitable for light meals, coffee or drinks for two users | |
| Poolside auxiliary seating | Water-draining slats resist splash damage for near-pool placement | |
| Balcony bistro cafe setup | Matches small commercial patio seating for boutique food service | |
| Temporary event seating | Foldable design allows quick setup and teardown for small gatherings | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
| EN 581-1:2017 | Outdoor furniture – Seating and tables for camping, domestic and contract use – General safety requirements | |
|---|---|---|
| EN 581-2:2019 | Outdoor furniture – Mechanical safety requirements for seating, applicable to chair structural testing | |
| EN 581-3:2017 | Outdoor furniture – Mechanical safety requirements for tables, applicable to table stability testing |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for surface and structural safety checks | |
|---|---|---|
| GB/T 5296.6-2004 | Instructions for use of consumer products – Part 6: Furniture, applicable for product labeling requirements | |
| GB/T 1865-2009 | Paints and varnishes – Artificial weathering and exposure to artificial radiation, applicable for outdoor finish durability |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for surface and structural safety checks; 2. GB/T 5296.6-2004: Instructions for use of consumer products – Part 6: Furniture, applicable for product labeling requirements; 3. GB/T 1865-2009: Paints and varnishes – Artificial weathering and exposure to artificial radiation, applicable for outdoor finish durability; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
