| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 2300 x 1440 x 2370 mm | |
|---|---|---|
| Seat width | 1200 mm | |
| Seat depth | 450 mm | |
| Seat height from ground | 430 mm | |
| Swing clearance under seat | 150 mm | |
| Swing maximum forward/backward travel | 300 mm | |
| Support frame leg tube diameter | 60 mm | |
| Suspension chain length | 1200 mm | |
| Arched canopy crest width | 2000 mm | |
| Lower side shelf width | 500 mm | |
| Base footprint width | 2100 mm | |
| Base footprint depth | 1200 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Maximum static load capacity | 260 kg | |
|---|---|---|
| Product net weight | 55 kg | |
| Swing motion cycle rating | 20000 cycles | |
| Powder coat salt spray resistance | 500 hours | |
| Suspension chain tensile strength per side | 200 kg | |
| Recommended maximum occupant count | 2 adults | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Seat and backrest panels | Sand-cast aluminum 4 mm thick with open floral scroll pattern | |
|---|---|---|
| Support frame posts and legs | Extruded aluminum alloy tube 2 mm wall thickness | |
| Arched top canopy crest | Sand-cast aluminum 5 mm thick with shell and scroll ornament | |
| Surface finish | Outdoor-grade polyester powder coat, antique bronze textured finish | |
| Suspension components | Galvanized steel chain 6 mm link diameter, zinc-plated steel hangers | |
| Integrated side armrests | Cast aluminum 3 mm thick with curved scroll edge detailing | |
| Lower side support shelves | Cast aluminum openwork lattice 3 mm thick | |
| Foot pads | Molded rubber non-slip pads 10 mm thick at each leg base | |
| Assembly hardware | Stainless steel bolts, nuts and washers, 8 mm diameter | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Swing motion mechanism | Seat suspended by dual chains on both sides, allowing smooth front-back pendulum motion | |
|---|---|---|
| Integrated side shelving | Fixed openwork metal shelves on both sides of frame for placing small items | |
| Fixed arched canopy frame | Solid cast decorative arched top provides structural support without fabric shade | |
| Freestanding installation | Four-point leg base requires no permanent ground anchoring for level hard surfaces | |
| Weather-resistant operation | All-metal construction withstands rain, sun and humidity without rust degradation | |
| Static fixed seating | Seat is non-reclining, non-convertible, maintains fixed upright bench position | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Residential patio installation | Suitable for backyard, porch, villa courtyard leisure seating for 2 adults | |
|---|---|---|
| Waterfront promenade placement | Appropriate for riverside, lakeside public walkways and park leisure zones | |
| Commercial outdoor venue use | Suitable for hotel terraces, resort gardens, open-air café seating areas | |
| Balcony placement | Fits large covered residential balconies with sufficient 2.4m ceiling clearance | |
| Garden landscape furnishing | Complements traditional and classic landscape design as decorative functional seating | |
| No cushion required use | Usable without additional cushions due to contoured cast metal seat surface |
EU Market Access Requirements* EN Standards
| EN 581-1:2017 | Applicable safety standard for outdoor residential seating furniture mechanical requirements | |
|---|---|---|
| EN 581-2:2019 | Applicable mechanical safety and strength test methods for outdoor seating |
Standards applicable to China-market projects
| GB/T 3324-2017 | Applicable to general technical requirements for metal outdoor furniture durability and safety | |
|---|---|---|
| GB 28007-2011 | Applicable to structural safety requirements for children and adult outdoor seating furniture | |
| GB/T 19001-2016 | Applicable quality management system reference for furniture manufacturing process control |
This product must meet the following technical requirements: 1. GB/T 3324-2017: Applicable to general technical requirements for metal outdoor furniture durability and safety; 2. GB 28007-2011: Applicable to structural safety requirements for children and adult outdoor seating furniture; 3. GB/T 19001-2016: Applicable quality management system reference for furniture manufacturing process control; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
