| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set footprint | 1000 x 1000 x 970 mm | |
|---|---|---|
| Round table dimensions | 900 mm diameter x 750 mm height | |
| Chair overall dimensions | 560 mm width x 680 mm depth x 970 mm height | |
| Chair seat height | 450 mm | |
| Chair seat diameter | 420 mm | |
| Chair backrest height | 520 mm | |
| Table base spread diameter | 720 mm | |
| Umbrella hole diameter | 51 mm | |
| Table rim width | 60 mm | |
| Leg floor contact pad diameter | 30 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Total set net weight | 70 kg | |
|---|---|---|
| Per chair static load capacity | 180 kg | |
| Powder coat salt spray resistance | 1000 hours | |
| Coating UV fade resistance | 5 years | |
| Seating capacity | 4 people | |
| Leveling adjustment range per foot | 10 mm | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Table and chair frame | Die-cast aluminum alloy, fully welded construction | |
|---|---|---|
| Tabletop inlay | Ceramic porcelain tile, geometric lattice pattern | |
| Table rim and base | Cast aluminum with antique bronze hand-brushed finish | |
| Surface finish | High-temperature baked electrostatic powder coat | |
| Chair seat and back | Pierced cast aluminum lattice and scroll filigree | |
| Chair legs | Cast aluminum cabriole-style curved legs with decorative joinery | |
| Foot pads | Non-slip, anti-scratch rubber pads | |
| Frame wall thickness | 4 mm | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Center umbrella compatibility | Removable cover fits 51mm diameter patio umbrella poles | |
|---|---|---|
| Surface water drainage | Pierced chair lattice and grouted tile gaps drain rainwater | |
| Uneven surface adjustment | Threaded leveler feet adjust up to 10mm to stabilize on sloped patios | |
| Year-round outdoor use | Powder-coated aluminum resists rust, fading, mold and salt spray | |
| Low-maintenance cleaning | Smooth powder coat and glazed tile wipe clean with damp cloth | |
| Seat ergonomics | Contoured cast seat and curved scroll back support upright dining posture | |
| Structural joint design | Fully welded cast joints eliminate loose fastener failure risk | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Residential patio and garden dining | 4-person seating for backyard meals, tea service and casual outdoor gatherings | |
|---|---|---|
| Villa courtyard and balcony use | Ornate antique bronze finish complements traditional and classic landscape design | |
| Commercial outdoor seating | Weather-resistant construction suitable for cafes, bistro patios and resort terraces | |
| Poolside dining areas | Rust-proof aluminum and glazed tile tolerate chlorinated water splash and humidity | |
| Balcony small-space dining | 900mm round diameter fits compact outdoor living spaces without excess footprint | |
| Year-round exterior installation | UV and rust resistant finish eliminates need for seasonal indoor storage |
EU Market Access Requirements* EN Standards
| EN 581-1:2017 | Outdoor furniture seating and table safety requirements for residential patio use | |
|---|---|---|
| EN 581-2:2019 | Mechanical safety test methods for outdoor seating structural strength | |
| EN 581-3:2019 | Mechanical safety test methods for outdoor table structural stability |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for metal furniture, applicable to frame structural strength | |
|---|---|---|
| GB/T 17657-2013 | Surface coating performance test methods for furniture finish durability verification | |
| GB 28007-2011 | Safety requirements for children's furniture if used in family patio settings |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for metal furniture, applicable to frame structural strength; 2. GB/T 17657-2013: Surface coating performance test methods for furniture finish durability verification; 3. GB 28007-2011: Safety requirements for children's furniture if used in family patio settings; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
