| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1070 x 1070 x 750 mm | |
|---|---|---|
| Tabletop thickness | 30 mm | |
| Lower shelf dimensions | 450 x 450 x 20 mm | |
| Knee clearance height | 670 mm | |
| Central pedestal pole diameter | 60 mm | |
| Splayed leg spread diameter | 1020 mm | |
| Tabletop edge lip thickness | 15 mm | |
| Lower shelf vertical clearance above floor | 380 mm | |
| Apron height under tabletop | 80 mm | |
| Carcass Panel Thickness | 25 mm | |
| Back Panel Thickness | 9 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
| Net weight | 22 kg | |
|---|---|---|
| Distributed static tabletop load capacity | 75 kg | |
| Rated seating capacity | 4 people | |
| Frame coating rust resistance service life | 3 years | |
| Mosaic tile surface UV stability | 5 years | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points | |
| Recommended Procurement Warranty | Carcass 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop surface | 10mm thick ceramic mosaic tiles with radial sunburst geometric inlay | |
|---|---|---|
| Tabletop backing panel | 18mm thick fiber cement board | |
| Tabletop edge trim | 2mm thick powder-coated steel band | |
| Frame and leg structure | 1.5mm wall thickness powder-coated carbon steel | |
| Lower storage shelf | 1.2mm thick steel lattice with open crisscross weave | |
| Central support pedestal | 2mm wall thickness tubular steel | |
| Fastener hardware | Zinc-plated steel bolts and connectors | |
| Floor contact glides | 10mm diameter non-marking plastic glides | |
| Edge Band Thickness | 2 mm | |
| Primary Connector Specification | Reference M6-M8 cam/bolt fittings with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Outdoor weather suitability | Rain and UV resistant construction, designed for uncovered patio use | |
|---|---|---|
| Lower shelf storage | Open lattice mid-height shelf holds small dining items, napkins or table accessories | |
| Stable pedestal support | Four splayed legs anchor central pedestal to tabletop rim to prevent tipping | |
| Flat tabletop dining surface | Smooth level mosaic surface supports full place settings, drinkware and serving dishes | |
| Partial on-site assembly | Frame and legs attach to pre-assembled tabletop with included hardware | |
| Cable / Vent Opening Reference | If fitted, 80 mm diameter |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
Recommended spaces / users / usage modes
| Residential patio and deck dining | Suits open outdoor decks, balconies and garden patios for casual family meals | |
|---|---|---|
| Small café and bistro outdoor seating | Appropriate for boutique café al fresco seating areas with four guest capacity | |
| Four-person casual dining configuration | Pairs with four standard height patio dining chairs for balanced seating layout | |
| Seasonal outdoor use setup | Recommended for use with a weather cover during off-season wet or cold periods | |
| Mixed material outdoor living spaces | Complements wicker, metal and wood patio furniture collections |
EU Market Access Requirements* EN Standards
| EN 581-1:2017 | Outdoor furniture seating and table safety requirements, general safety benchmark | |
|---|---|---|
| EN 581-3:2017 | Mechanical safety requirements for outdoor tables, structural load testing reference |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for metal furniture, applicable for frame strength and finish inspection | |
|---|---|---|
| GB 18584-2001 | Limit of harmful substances in indoor furniture, recommended for material emission screening | |
| GB/T 19995.2-2005 | Performance requirements for outdoor furniture metal surfaces, applicable for coating durability |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for metal furniture, applicable for frame strength and finish inspection; 2. GB 18584-2001: Limit of harmful substances in indoor furniture, recommended for material emission screening; 3. GB/T 19995.2-2005: Performance requirements for outdoor furniture metal surfaces, applicable for coating durability; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
