| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall table dimensions | 1880 x 920 x 730 mm | |
|---|---|---|
| Tabletop tile inset thickness | 12 mm | |
| Central grill cavity internal dimensions | 850 x 280 x 120 mm | |
| Cast aluminum leg wall thickness | 4 mm | |
| Under-table knee clearance height | 660 mm | |
| Apron scrollwork decorative height | 120 mm | |
| Curved leg outer diameter at floor contact | 38 mm | |
| Per-seat table edge width per diner | 620 mm | |
| Tabletop border width around tile inset | 80 mm | |
| Grill grate surface height below tabletop | 50 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Distributed static tabletop load capacity | 150 kg | |
|---|---|---|
| Table net weight | 42 kg | |
| Cast aluminum frame rust resistance service life | 10 years | |
| Table surface heat resistance for hot cookware | 180 °C | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Table frame, apron and legs | Powder-coated antique bronze cast aluminum | |
|---|---|---|
| Tabletop inset surface | Matte glazed ceramic outdoor-grade tiles | |
| Central grill cavity liner | Cold-rolled steel with high-temperature black paint | |
| Grill cooking grate | Chrome-plated steel bar grate | |
| Table leg foot pads | Non-slip rubber glides | |
| Assembly fasteners | Stainless steel M6 bolts and nuts | |
| Surrounding chair frames | Matching powder-coated cast aluminum | |
| Chair seat cushions | Water-repellent polyester fabric over high-density polyurethane foam | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Integrated central charcoal grilling function | Removable charcoal tray and grate for at-table cooking during meals | |
|---|---|---|
| Tabletop dual-use design | Grill cavity supports optional flat cover to convert to full dining surface when not cooking | |
| Knock-down assembly structure | Legs and apron bolt to tabletop frame for flat-pack shipping and on-site assembly | |
| Two swivel dining chairs | 360-degree rotation with ring base on two end chairs, no rocking function | |
| Weather-resistant outdoor operation | Frame and tile materials withstand rain, UV exposure and temperature swings without rust or degradation | |
| Removable chair cushions | Cushions secure to chair seats with tie straps for easy removal, cleaning and seasonal storage | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential patio and courtyard dining | Suitable for backyard decks, stone patios and garden spaces for family meals and grilling | |
|---|---|---|
| Outdoor hospitality venues | Applicable for open-air restaurant patios, resort poolside dining areas and rooftop bar terraces | |
| 6-person casual dining events | Seats 6 adults comfortably for al fresco meals, barbecues and small outdoor gatherings | |
| All-season outdoor installation | Rust-resistant cast aluminum construction supports permanent placement in temperate climates | |
| Mixed dining and cooking use | Eliminates need for separate grill and dining table for compact outdoor entertaining spaces |
EU Market Access Requirements* EN Standards
| EN 581-1:2017 | Safety requirements for outdoor seating and tables for domestic use, core European market acceptance standard | |
|---|---|---|
| EN 581-2:2019 | Mechanical safety and structural strength test methods for outdoor dining furniture | |
| EN 1022:2018 | Stability testing for domestic seating, applicable to matching swivel dining chairs |
US and Canada office-furniture standards
| ANSI/BIFMA X5.1-2017 | General purpose office chair standard, reference for chair static and durability load testing | |
|---|---|---|
| ANSI/BIFMA X5.5-2021 | Desk products standard, reference for table structural load and stability testing |
Standards applicable to China-market projects
| GB 28007-2011 | Applicable for children's furniture safety, relevant if used in family patio settings with children | |
|---|---|---|
| GB/T 3324-2017 | General technical requirements for wooden furniture, applies to quality checks for structural stability | |
| GB/T 17657-2013 | Test methods for surface finish durability, applicable for powder coating performance verification |
This product must meet the following technical requirements: 1. GB 28007-2011: Applicable for children's furniture safety, relevant if used in family patio settings with children; 2. GB/T 3324-2017: General technical requirements for wooden furniture, applies to quality checks for structural stability; 3. GB/T 17657-2013: Test methods for surface finish durability, applicable for powder coating performance verification; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
