| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set footprint | 2400 x 1800 mm | |
|---|---|---|
| Table overall dimensions | 1520 x 970 x 750 mm | |
| Table leg section | 60 x 60 mm square | |
| Table slat gap | 8 mm | |
| Chair overall dimensions | 640 x 580 x 970 mm | |
| Chair seat height | 460 mm | |
| Chair seat dimensions | 450 x 440 mm | |
| Chair armrest height | 660 mm | |
| Table umbrella hole diameter | 40 mm | |
| Knee clearance under table | 680 mm | |
| Chair backrest height | 480 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Total set weight | 90 kg | |
|---|---|---|
| Single chair static load capacity | 181 kg | |
| Seating capacity | 6 people | |
| Coating outdoor rust resistance service life | 3 years | |
| Chair stackable storage quantity | 4 chairs | |
| Limited warranty period | 12 months | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Table frame and legs | 1.2mm thick powder coated square steel tubing | |
|---|---|---|
| Tabletop slats | 20mm wide coated steel slats with drain gaps | |
| Chair frame and legs | 1.0mm thick powder coated square steel tubing | |
| Chair seat and back slats | 18mm wide coated steel vertical slats | |
| Surface finish | Matte black e-coating plus polyester powder coat | |
| Foot pads | Non-slip adjustable plastic foot glides | |
| Fasteners | Stainless steel assembly bolts and nuts | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Surface water drainage | Gapped slats across table and seats direct rainwater off surfaces | |
|---|---|---|
| Surface leveling adjustment | Adjustable foot pads on table and chair legs compensate for uneven paving | |
| Umbrella compatibility | Center table umbrella hole fits standard patio umbrella poles | |
| Chair storage | Armchairs stack vertically to reduce footprint during off-season storage | |
| Cleaning maintenance | Smooth coated slat surfaces wipe clean with damp cloth, no fabric removal needed | |
| Assembly requirement | Knock-down assembly with included hex key and hardware | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Number of shipping cartons | 4 | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Residential patio use | Suitable for backyard paved patios adjacent to lawn areas for family outdoor meals | |
|---|---|---|
| Commercial outdoor seating | Applicable for café, bistro, or beer garden outdoor dining areas with weather exposure | |
| Balcony installation | Compact footprint fits large residential balconies for small group outdoor dining | |
| All-weather placement | Suitable for year-round outdoor placement in temperate and subtropical climates | |
| Coordinate design | Uniform matte black finish complements modern, minimalist, and industrial outdoor decor schemes |
EU Market Access Requirements* EN Standards
| Outdoor furniture seating strength | EN 581:2019 | |
|---|---|---|
| Outdoor furniture table safety | EN 581:2019 |
Standards applicable to China-market projects
| Outdoor furniture structural safety | GB 28007 | |
|---|---|---|
| Metal furniture coating durability | GB/T 3324 |
This product must meet the following technical requirements: 1. Outdoor furniture structural safety: GB 28007; 2. Metal furniture coating durability: GB/T 3324; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
