| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall table dimensions | 1560 x 950 x 750 mm | |
|---|---|---|
| Table slat width | 70 mm | |
| Table leg section | 50 x 50 mm square steel tube | |
| Overall chair dimensions | 580 x 640 x 890 mm | |
| Chair seat height | 450 mm | |
| Chair seat depth | 450 mm | |
| Chair armrest height | 660 mm | |
| Chair backrest height | 440 mm | |
| Chair leg tube diameter | 30 mm square | |
| Table edge overhang | 50 mm | |
| Under-table knee clearance height | 650 mm | |
| Slat gap width | 10 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Set total net weight | 84 kg | |
|---|---|---|
| Table static load capacity | 120 kg | |
| Seating capacity | 6 people | |
| Stackable chair storage height | 8 units | |
| Frame corrosion resistance service life | 3 years | |
| WPC slat surface UV fade resistance | 2 years | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles | |
| Five-star Base Static Load Reference | Acceptance target ≥120 kg; chair reference load 150 kg |
Core acceptance fields · Panels / hardware / frame / upholstery
| Table frame construction | 1.8 mm thick powder-coated carbon steel square tube | |
|---|---|---|
| Tabletop slats | 20 mm thick weather-resistant wood-look WPC composite | |
| Chair frame construction | 1.5 mm thick powder-coated carbon steel square tube | |
| Chair seat and back slats | 20 mm thick wood-look WPC composite | |
| Frame surface finish | Matte black polyester powder coating | |
| Foot pads | 10 mm thick non-slip rubber | |
| Hardware fasteners | 304 stainless steel screws and bolts | |
| Frame weld points | Full penetration ground welds at tube joints | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm | |
| Tilt Mechanism Plate Thickness | 2.5 mm cold-rolled steel |
Adjustment / rotation / tilt / mobility / storage features
| Surface water drainage | 10 mm uniform gaps between all horizontal slats | |
|---|---|---|
| Chair armrest support | Integrated steel frame armrests capped with WPC slats | |
| Table level adjustment | Threaded adjustable rubber feet on each table leg | |
| Chair storage | Vertical stackable design for off-season storage | |
| Umbrella compatibility | 65 mm diameter center umbrella hole with cap | |
| Assembly hardware included | All required bolts, allen key and illustrated instruction manual | |
| Frame weather protection | Powder coat finish resists rust, chipping and UV fading | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
| Residential patio application | Suitable for backyard, garden or balcony dining for family meals | |
|---|---|---|
| Commercial outdoor seating | Applicable for cafe, bistro or restaurant patio dining areas | |
| Event rental use | Ideal for outdoor wedding, party or event temporary seating | |
| Climate suitability | Designed for temperate and subtropical outdoor environments | |
| Recommended pairing | Compatible with 2.7 m diameter center-post patio umbrella | |
| User demographic | Designed for adult users for casual or formal outdoor dining | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
| EN 581-1:2017 | Outdoor furniture safety requirements for domestic and contract seating and tables | |
|---|---|---|
| EN 581-2:2019 | Mechanical safety and performance test methods for outdoor dining seating | |
| EN 581-3:2019 | Mechanical safety and performance test methods for outdoor dining tables |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applies to WPC slat structural performance | |
|---|---|---|
| GB/T 24821-2009 | Outdoor furniture structural safety requirements for metal framed dining sets | |
| GB 18584-2001 | Indoor decoration material hazardous substance limits, reference for material emission testing |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applies to WPC slat structural performance; 2. GB/T 24821-2009: Outdoor furniture structural safety requirements for metal framed dining sets; 3. GB 18584-2001: Indoor decoration material hazardous substance limits, reference for material emission testing; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
