| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set footprint | 1674 x 820 x 754 mm | |
|---|---|---|
| Dining table dimensions | 1659 x 829 x 754 mm | |
| Table slat width | 70 mm | |
| Table slat gap for drainage | 8 mm | |
| Table leg profile | 60 x 60 mm square | |
| Center umbrella hole diameter | 66 mm | |
| Armchair overall dimensions | 600 x 620 x 880 mm | |
| Armchair seat height | 450 mm | |
| Armchair seat depth | 480 mm | |
| Armchair armrest height above seat | 200 mm | |
| Armchair slat thickness | 22 mm | |
| Chair leg profile | 30 x 30 mm square | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Tabletop static load capacity | 150 kg | |
|---|---|---|
| Set total net weight | 72 kg | |
| Seating capacity | 6 adults | |
| Finish UV fade resistance | 3000 hours | |
| Surface stain resistance rating | Grade 5 | |
| Hardware corrosion resistance | 1000 hours salt spray | |
| Limited warranty period | 2 years | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Table and chair frame | 1.2mm thick powder-coated steel tube | |
|---|---|---|
| Tabletop slats | 22mm thick weather-resistant HDPE/WPC composite | |
| Chair seat and back slats | 20mm thick HDPE/WPC composite slats | |
| Surface finish | Matte black polyester powder coating | |
| Fasteners and hardware | 304 stainless steel bolts, nuts and caps | |
| Chair armrests | Integrated steel frame with matching composite slat top | |
| Foot pads | Non-slip adjustable PE plastic foot caps | |
| Surface texture | Fine embossed matte texture | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Tabletop drainage | Even slat gaps allow rainwater runoff | |
|---|---|---|
| Center umbrella opening | Pre-drilled center hole accepts standard patio umbrellas | |
| Fixed chair structure | Welded steel frame with fixed 105° back angle | |
| Stackable chair design | Chairs stack vertically for off-season storage | |
| Surface maintenance | Smooth non-porous slats wipe clean with damp cloth | |
| Leg level adjustment | Adjustable foot pads compensate for uneven deck surfaces | |
| Weather performance | Full set is waterproof, rustproof and UV resistant | |
| Fastener installation | Pre-drilled holes with included hex wrench assembly | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Residential patio/deck use | Suitable for backyard, balcony or terrace outdoor dining for 6 people | |
|---|---|---|
| Commercial outdoor seating | Applicable for cafe, restaurant, or bistro sidewalk outdoor dining areas | |
| All-weather placement | Designed for year-round exposed outdoor use without covered storage | |
| Recommended seating layout | 2 chairs placed along each long table side, 1 chair at each short end | |
| Compatible accessory | Pair with standard patio umbrella for sun shading through center table hole | |
| Surface compatibility | Safe for use on composite decking, stone tile or concrete patio surfaces |
EU Market Access Requirements* EN Standards
| EN 581-1:2017 | Outdoor furniture safety requirements for seating and tables, general use | |
|---|---|---|
| EN 581-2:2019 | Mechanical safety requirements for outdoor seating, applicable to chair load rating | |
| EN 581-3:2019 | Mechanical safety requirements for outdoor tables, applicable to table stability |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to WPC components | |
|---|---|---|
| GB/T 24543-2009 | Safety requirements for outdoor leisure furniture, applicable to structural stability | |
| GB/T 1732-2020 | Paint film impact resistance test, applicable to powder coated steel surfaces | |
| GB/T 1766-2008 | Paint and varnish weathering rating, applicable to outdoor finish durability |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to WPC components; 2. GB/T 24543-2009: Safety requirements for outdoor leisure furniture, applicable to structural stability; 3. GB/T 1732-2020: Paint film impact resistance test, applicable to powder coated steel surfaces; 4. GB/T 1766-2008: Paint and varnish weathering rating, applicable to outdoor finish durability; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
