| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall assembled set footprint | 1200 x 1200 mm | |
|---|---|---|
| Round table overall dimensions | 610 mm diameter x 711 mm height | |
| Single chair overall dimensions | 470 mm wide x 470 mm deep x 838 mm tall | |
| Seat height from floor | 457 mm | |
| Seat usable dimensions | 457 mm wide x 432 mm deep | |
| Backrest height above seat | 381 mm | |
| Folded chair thickness for storage | 89 mm | |
| Folded table thickness for storage | 76 mm | |
| Table leg cross-brace ground span | 533 mm | |
| Under-table knee clearance height | 660 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Total assembled set net weight | 17.6 kg | |
|---|---|---|
| Per-chair static weight capacity | 150 kg | |
| Table top static weight capacity | 50 kg | |
| Recommended number of users | 2 people | |
| Folded storage footprint per chair | 0.04 sqm | |
| Seat fabric UV fade resistance lifespan | 2 years | |
| Frame rust resistance rating | 3 years | |
| Recommended table top distributed load | 30 kg | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ |
Core acceptance fields · Panels / hardware / frame / upholstery
| Table and chair frame construction | 1.0mm thick powder-coated steel tube | |
|---|---|---|
| Table top panel | 5mm thick red tinted tempered glass with white plastic rim | |
| Chair seat and back upholstery | 0.4mm thick red breathable polyester mesh fabric | |
| Folding hardware components | Zinc-plated steel rivets and pivot pins | |
| Foot protection caps | 10mm thick injection-molded polypropylene | |
| Frame surface finish | Matte light gray polyester powder coating | |
| Seat/back mesh edge binding | 15mm wide double-stitched polypropylene webbing | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm | |
| Tilt Mechanism Plate Thickness | 2.5 mm cold-rolled steel | |
| Five-star Base Material Thickness | Metal base wall 3.5 mm; diameter 700 mm |
Adjustment / rotation / tilt / mobility / storage features
| Folding mechanism operation | X-brace cross-frame design, folds fully flat without tools | |
|---|---|---|
| Table leg lock function | Spring-loaded pivot lock secures legs in open position | |
| Chair seating flexibility | Taut mesh suspension provides mild flex under load | |
| Maintenance requirement | Wipe-clean glass and mesh surfaces with mild detergent | |
| Portability feature | Lightweight frame allows single-person carry of individual pieces | |
| Leveling function | Rigid X-leg design adapts to flat hard flooring surfaces | |
| Storage compatibility | Folded chairs nest alongside folded table for vertical storage | |
| Assembly requirement | No assembly required, arrives fully folded and ready to use | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
| Residential balcony use | Ideal for small apartment balconies with limited floor space for two-person casual seating | |
|---|---|---|
| Patio and garden use | Suitable for covered patio, porch or garden nook casual dining and drink service | |
| Indoor sunroom use | Works for compact sunroom or breakfast nook lightweight casual seating | |
| Temporary event seating | Portable for pop-up events, small outdoor gatherings or temporary guest seating | |
| Rental property furnishing | Suitable for short-term rental balcony furnishing with low maintenance requirements | |
| Small office break area use | Fits in compact office outdoor break spaces for quick employee refreshment breaks | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
| Outdoor furniture mechanical safety recommendation | EN 581:2017 | |
|---|---|---|
| Folding furniture stability recommendation | EN 581:2019 | |
| Textile upholstery durability recommendation | EN 14465:2006 |
Standards applicable to China-market projects
| Outdoor furniture structural safety recommendation | GB/T 3324 | |
|---|---|---|
| Glass furniture safety recommendation | GB 15763.2 | |
| Metal furniture coating recommendation | GB/T 1993 |
This product must meet the following technical requirements: 1. Outdoor furniture structural safety recommendation: GB/T 3324; 2. Glass furniture safety recommendation: GB 15763.2; 3. Metal furniture coating recommendation: GB/T 1993; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
