| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set footprint | 1560 x 965 x 749 mm | |
|---|---|---|
| Table surface dimensions | 1524 x 940 mm | |
| Table height | 711 mm | |
| Central umbrella hole diameter | 40 mm | |
| Under-table knee clearance height | 673 mm | |
| Single chair overall dimensions | 579 x 635 x 965 mm | |
| Chair seat dimensions | 495 x 457 mm | |
| Seat height from floor | 457 mm | |
| Armrest height from floor | 635 mm | |
| Tabletop slat thickness | 76 mm | |
| Table leg tube diameter | 38 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Per-chair static weight capacity | 136 kg | |
|---|---|---|
| Total table distributed static load capacity | 91 kg | |
| Single chair net weight | 14 kg | |
| Seating capacity | 6 people | |
| Stacked chair storage height for 6 units | 1067 mm | |
| Finish outdoor service life | 3 years | |
| Static structural stability load for table | 181 kg | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Table frame and legs | 1.2mm thick powder-coated carbon steel tubing | |
|---|---|---|
| Table slats | E-coated steel slats with matte black powder finish | |
| Chair frames | 1.0mm thick tubular steel with integrated curved armrests | |
| Chair seat and back slats | Horizontal steel slats riveted to chair frames | |
| Frame surface finish | Double layer E-coat plus black powder coating | |
| Foot pads | Injection-molded non-slip rubber pads on all leg ends | |
| Umbrella hole fitting | Steel rimmed center hole with optional plastic insert | |
| Assembly hardware | Zinc-plated steel bolts and nuts with corrosion resistant coating | |
| Cross support bracing | Steel tube cross braces under tabletop | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Center umbrella support | 40mm diameter hole accepts standard patio umbrellas | |
|---|---|---|
| Chair stackability | Up to 6 chairs nest vertically for off-season storage | |
| Surface drainage | Gaps between horizontal slats shed rainwater quickly | |
| Structural stability | Four-legged table with lower cross bracing resists wobble | |
| Floor protection | Rubber foot pads prevent scratches to wood or composite decking | |
| Assembly requirement | Knock-down assembly with included basic hand tools | |
| Weather resistance | Coated steel construction withstands rain, sun and mild frost | |
| Seat ventilation | Slatted seat and back surfaces allow air flow to reduce heat buildup | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Residential patio installation | Suited for wood/composite decks, stone patios and garden courtyards | |
|---|---|---|
| Small outdoor dining use | Ideal for 6-person family meals, weekend barbecues and casual gatherings | |
| Commercial outdoor seating | Applicable for cafe patios, poolside lounges and resort terrace dining | |
| Balcony or rooftop placement | Compact footprint fits standard 10x12 foot outdoor living spaces | |
| Sun-shaded configuration | Umbrella hole allows adding a market umbrella for UV protection during daytime use | |
| Low-maintenance outdoor furnishing | Wipe-clean powder-coated surfaces require no staining or sealing |
EU Market Access Requirements* EN Standards
| Outdoor furniture mechanical safety | EN 581:2017 | |
|---|---|---|
| Outdoor furniture durability testing | EN 581:2019 |
Standards applicable to China-market projects
| Outdoor furniture structural safety | GB/T 28008 | |
|---|---|---|
| Metal furniture coating performance | GB/T 3325 | |
| Furniture stability assessment | GB/T 10357.7 |
This product must meet the following technical requirements: 1. Outdoor furniture structural safety: GB/T 28008; 2. Metal furniture coating performance: GB/T 3325; 3. Furniture stability assessment: GB/T 10357.7; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
