| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1520 x 1520 x 750 mm | |
|---|---|---|
| Tabletop slat thickness | 36 mm | |
| Tabletop perimeter frame width | 80 mm | |
| Leg cross-section | 60 x 60 mm square | |
| Leg wall thickness | 1.5 mm | |
| Floor to apron clearance | 680 mm | |
| Center umbrella hole diameter | 40 mm | |
| Slat gap width | 8 mm | |
| Underside cross-brace section | 30 x 30 mm | |
| Adjustable foot glide height | 10 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Net weight | 23 kg | |
|---|---|---|
| Distributed static tabletop load capacity | 227 kg | |
| Seating capacity | 6 persons | |
| Powder coat finish abrasion resistance | 2000 cycles | |
| Frame rust protection service life | 36 months | |
| Wind load resistance | 80 km/h | |
| Maximum point load on tabletop | 45 kg | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop slats | Powder-coated steel slats with e-coat underlayer | |
|---|---|---|
| Table frame/legs | 1.5mm gauge square steel tubing | |
| Underside support bracing | Powder-coated steel cross bars | |
| Surface finish | Matte black polyester powder coating over e-coat primer | |
| Leveling feet | Nylon polymer adjustable glides | |
| Fasteners | Stainless steel M6 bolts and nuts | |
| Umbrella hole insert | Polypropylene plastic ring | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
Adjustment / rotation / tilt / mobility / storage features
| Water drainage design | Uniform 8mm gaps between slats drain rainwater directly off tabletop | |
|---|---|---|
| Leveling adjustment | 10mm height-adjustable nylon feet on each leg compensate for uneven patio pavers | |
| Umbrella compatibility | 40mm center hole accepts standard patio umbrella poles for shade | |
| Structural bracing | Steel cross-braces under tabletop connect legs to reduce wobble during use | |
| Weather resistance | E-coat primer plus powder coat resists rust, water, and UV fading for outdoor exposure | |
| Assembly requirement | Knock-down assembly with included hex key and hardware connects legs to tabletop | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential patio use | Suitable for backyard paved patios or decks for family outdoor meals | |
|---|---|---|
| Commercial outdoor dining | Appropriate for café or restaurant patio seating for 6 guests | |
| Garden/lawn placement | Usable on level lawn or garden entertaining areas with leveling feet adjusted | |
| Balcony large-space use | Fits oversized residential balconies for al fresco dining for 6 people | |
| Event rental use | Suitable for outdoor party and event rental fleets |
EU Market Access Requirements* EN Standards
| EN 581-1:2017 | Outdoor furniture seating and table safety requirements for residential use | |
|---|---|---|
| EN 581-2:2019 | Mechanical safety and strength test methods for outdoor dining tables |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for metal furniture, applicable for structural stability verification | |
|---|---|---|
| GB/T 17657-2013 | Surface finish performance test methods for coating adhesion and abrasion | |
| GB 28007-2011 | Safety requirements for children's furniture, applicable if used in family patio spaces |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for metal furniture, applicable for structural stability verification; 2. GB/T 17657-2013: Surface finish performance test methods for coating adhesion and abrasion; 3. GB 28007-2011: Safety requirements for children's furniture, applicable if used in family patio spaces; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
