| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall table dimensions | 900 mm diameter x 750 mm height | |
|---|---|---|
| Table umbrella hole diameter | 60 mm | |
| Table leg splay footprint | 820 mm diameter at base | |
| Overall chair dimensions | 580 mm width x 620 mm depth x 890 mm height | |
| Chair seat height | 460 mm | |
| Chair seat slat surface dimensions | 480 mm width x 420 mm depth | |
| Chair backrest height above seat | 430 mm | |
| Chair armrest height above seat | 200 mm | |
| Chair leg taper thickness at floor contact | 20 mm wide | |
| Table glass overhang past frame rim | 20 mm | |
| Seating clearance between adjacent chairs | 300 mm | |
| Knee clearance under table apron | 650 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Set total net weight (unpackaged) | 42 kg | |
|---|---|---|
| Single chair static weight capacity | 180 kg | |
| Tabletop static load capacity | 90 kg | |
| Recommended maximum user weight per seat | 136 kg | |
| Stackable chair storage count | 4 chairs per stack | |
| Finish outdoor fade resistance lifespan | 3 years | |
| Faux wood slat water absorption rate | 0.5% | |
| Table non-slip foot pad adjustment height | 15 mm | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ |
Core acceptance fields · Panels / hardware / frame / upholstery
| Table frame construction | 1.2 mm thick powder-coated steel tubing, bronze finish | |
|---|---|---|
| Tabletop material | 5 mm thick textured tempered glass, frosted patterned surface | |
| Chair seat slats | 12 mm thick HDPE faux wood grain slats, dark brown finish | |
| Chair frame and integrated armrests | 1.0 mm thick powder-coated steel, matte bronze finish | |
| Frame surface treatment | Electrophoretic e-coat under powder topcoat | |
| Table center umbrella hole ring | Polypropylene plastic bronze-colored insert | |
| Chair foot pads | Molded non-marking TPE rubber caps | |
| Fastener hardware | Stainless steel zinc-plated bolts and nuts | |
| Table support cross bracing | 16 mm diameter steel tube cross braces under tabletop | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm |
Adjustment / rotation / tilt / mobility / storage features
| Center umbrella accommodation | 60 mm table hole fits standard patio umbrellas | |
|---|---|---|
| Chair stackable storage | Armless nesting design allows vertical stacking of up to 4 chairs | |
| Table leveling adjustment | Threaded TPE foot pads adjust up to 15 mm height | |
| All-weather outdoor use | Rust-resistant frame and waterproof slats require no indoor storage | |
| Cushion compatibility | Flat slatted seat surface fits standard 450 mm square outdoor seat cushions | |
| Surface maintenance | Smooth powder-coat and HDPE surfaces wipe clean with mild detergent | |
| Structural bracing | Cross-braced table legs prevent wobbling during regular use | |
| Edge safety design | Rounded table glass edges and curved armrests eliminate sharp corners | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
| Residential patio dining | Fits 4 adults for outdoor meals on back patios, decks or verandas | |
|---|---|---|
| Balcony dining | 900 mm diameter table fits small apartment balconies for casual meals | |
| Poolside seating area | Rust-resistant materials withstand splashes, humidity and UV exposure | |
| Café outdoor bistro seating | Industrial bronze design complements casual commercial patio seating | |
| Garden entertainment seating | Umbrella hole allows shaded seating for small outdoor gatherings | |
| Small courtyard dining | Symmetrical 4-seat layout works in enclosed courtyard spaces | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
| Outdoor furniture mechanical safety recommendation | EN 581:2017 | |
|---|---|---|
| Outdoor furniture durability testing recommendation | EN 581:2019 | |
| Tempered glass for furniture recommendation | EN 12150:2015 |
Standards applicable to China-market projects
| Outdoor furniture structural safety recommendation | GB 28007 | |
|---|---|---|
| Tempered glass safety recommendation | GB 15763.2 | |
| Metal furniture coating durability recommendation | GB/T 3324 | |
| Furniture stability testing recommendation | GB/T 10357.7 |
This product must meet the following technical requirements: 1. Outdoor furniture structural safety recommendation: GB 28007; 2. Tempered glass safety recommendation: GB 15763.2; 3. Metal furniture coating durability recommendation: GB/T 3324; 4. Furniture stability testing recommendation: GB/T 10357.7; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
