| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Primary Component Thickness | 40 mm according to load-bearing role | |
|---|---|---|
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Set total net weight | 54 kg | |
|---|---|---|
| Per-chair static weight capacity | 150 kg | |
| Tabletop evenly distributed load capacity | 45 kg | |
| Umbrella required base weight | 23 kg | |
| Recommended seating capacity | 4 adults | |
| Powder coat outdoor rust resistance lifespan | 3 years | |
| Polyester canopy UV fade resistance lifespan | 2 years | |
| Chair stackable storage height (4 chairs) | 1200 mm | |
| Weighted umbrella base diameter | 450 mm | |
| Reference Static Load | 150 kg depending on category |
Core acceptance fields · Panels / hardware / frame / upholstery
| Table frame and slats | 1.5mm thick carbon steel with black E-coat + powder coating | |
|---|---|---|
| Chair frames and slats | 1.2mm thick wrought iron with black matte powder coating | |
| Umbrella pole and ribs | Powder-coated steel with anti-rust treatment | |
| Umbrella canopy fabric | 180G PA-coated red polyester | |
| Umbrella base weight material | Cast iron core with plastic outer shell | |
| Chair leg feet | Non-slip plastic end caps | |
| Umbrella crank housing | Reinforced ABS plastic | |
| Fastener hardware | Zinc-plated steel bolts and nuts | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Umbrella manual crank lift | Rotating crank handle raises and lowers canopy to desired height | |
|---|---|---|
| Chair stackable storage | Chairs nest vertically for compact off-season storage | |
| Center umbrella pole pass-through | Tabletop 40mm hole secures umbrella pole aligned to weighted base | |
| Slatted surface drainage | Even gaps between table and chair slats drain rainwater quickly | |
| Partial assembly requirement | Bolts attach legs to table and chair frames with included tools | |
| Weather-resistant finish | Powder coated frames resist rain, UV damage and light scratches for outdoor use | |
| Fixed stable seating position | Welded angled chair legs prevent tipping on level paved surfaces | |
| Umbrella base compatibility | Fits standard 23kg weighted patio umbrella bases for wind stability | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Residential patio/backyard dining | 4-person seating for family outdoor meals and casual gathering | |
|---|---|---|
| Commercial outdoor café seating | Durable metal construction suitable for high-traffic bistro or sidewalk seating | |
| Balcony/rooftop leisure area | Compact round table footprint fits small urban outdoor spaces without wasted space | |
| Community park rest areas | Weather-resistant finish withstands constant public outdoor exposure | |
| Homestay/bed and breakfast outdoor areas | Uniform black and red color scheme creates welcoming guest seating | |
| Pop-up market/vendor stall seating | Portable stackable design allows quick setup and breakdown for temporary use | |
| Poolside lounge areas | Rust-resistant slatted metal resists water splashes and humidity exposure |
EU Market Access Requirements* EN Standards
| EN 581-1:2017 | Outdoor furniture safety and strength requirements for seating and tables | |
|---|---|---|
| EN 581-2:2019 | Mechanical safety requirements for outdoor seating | |
| EN 581-3:2019 | Mechanical safety requirements for outdoor tables |
Standards applicable to China-market projects
| GB 28478-2012 | Outdoor furniture safety performance requirements for seating and tables | |
|---|---|---|
| GB/T 3324-2017 | General technical requirements for metal furniture | |
| GB 18401-2010 | National general safety technical code for textile products |
This product must meet the following technical requirements: 1. GB 28478-2012: Outdoor furniture safety performance requirements for seating and tables; 2. GB/T 3324-2017: General technical requirements for metal furniture; 3. GB 18401-2010: National general safety technical code for textile products; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
