| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 610 x 660 x 831 mm | |
|---|---|---|
| Seat height | 500 mm | |
| Seat width | 530 mm | |
| Seat depth | 464 mm | |
| Backrest height | 300 mm | |
| Armrest height from floor | 730 mm | |
| Circular back cutout diameter | 100 mm | |
| Leg splay angle from vertical | 18 degrees | |
| Floor clearance under seat | 220 mm | |
| Seat pan thickness | 89 mm | |
| Leg cross-section diameter at floor | 30 mm | |
| Edge trim width | 8 mm | |
| Armrest height from seat | 230 mm | |
| Base footprint width between outermost leg contact points | 560 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm |
Net weight / load capacity / users / durability
| Net weight | 7 kg | |
|---|---|---|
| Static weight capacity | 136 kg | |
| Cushion foam density | 35 kg/m³ | |
| Foam rebound rate | 45% | |
| Seam strength | 120 N | |
| Leg joint static load rating | 200 kg per leg | |
| Floor protection pad thickness | 3 mm | |
| Recommended daily use duration per seating | 4 hours | |
| Surface abrasion resistance | 50000 cycles | |
| Backrest static load resistance | 76 kg |
Core acceptance fields · Panels / hardware / frame / upholstery
| Back and arm shell outer layer | 1.2mm thick PU leather/leatherette in mustard finish | |
|---|---|---|
| Seat upholstery | 1.2mm thick PU leather/leatherette matching back shell | |
| Edge trim | 8mm wide dark black/charcoal PVC binding | |
| Seat cushion fill | 35kg/m³ high-density polyurethane foam | |
| Backrest fill | 28kg/m³ polyurethane foam | |
| Internal shell substrate | 8mm thick molded bent plywood | |
| Legs | 12mm thick bent laminated natural birch plywood with clear lacquer finish | |
| Leg to frame brackets | 1.5mm thick powder-coated steel angle brackets | |
| Floor contact pads | 3mm thick non-slip black rubber/felt pads | |
| Stitching thread | High-tensile polyester thread in matching mustard color | |
| Upholstery adhesive | Low-VOC water-based contact adhesive | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board |
Adjustment / rotation / tilt / mobility / storage features
| Posture support | 105-degree fixed back angle | |
|---|---|---|
| Armrest integration | Curved wraparound integrated armrests formed as part of the continuous back shell | |
| Back cutout function | 100mm diameter circular cutout on right side of backrest | |
| Leg stability | Four splayed tapered bentwood legs angled 18 degrees from vertical | |
| Floor protection | Non-slip rubber pads fitted to each leg base | |
| Upholstery maintenance | Smooth non-porous PU upholstery surface | |
| Stacking compatibility | Non-stackable fixed construction | |
| Assembly configuration | Legs shipped detached from upholstered shell for transport | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Carton count per unit | 1 | |
|---|---|---|
| Single unit carton dimensions | 750 x 650 x 550 mm | |
| Single unit gross weight | 9 kg | |
| Single unit packaging volume | 0.268 CBM | |
| Assembly time per unit | 20 minutes | |
| 20ft GP container loading quantity | 240 units | |
| 40ft HQ container loading quantity | 580 units | |
| Packaging materials | 5mm thick corrugated outer carton, 10mm thick EPE foam edge protection, polybag over upholstered shell, hardware pack with Allen key and assembly instructions | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set |
Recommended spaces / users / usage modes
| Residential dining rooms | Suitable for placement around 750mm high standard dining tables, provides comfortable padded seating for family meals with mid-century modern styling that complements light wood table finishes | |
|---|---|---|
| Cafe and casual restaurant seating | Suitable for light commercial food service environments, wipe-clean PU upholstery supports quick turnover and easy maintenance between patrons | |
| Office break rooms and pantry areas | Suitable for employee break and casual meeting spaces, compact footprint fits efficiently around small break room tables, integrated armrests provide comfortable support for short breaks | |
| Home office guest seating | Suitable for use as a side or guest chair in home office setups, stylish curved design coordinates with modern desk finishes, seat height works with standard 760 mm high desks | |
| Color coordination options | Visible mustard/tan finish coordinates with neutral, wood-tone and dark interior palettes; background units in brown, dark gray and pink indicate available alternate colorways for customized space design | |
| Small space dining areas | Compact 610mm width and splayed leg design provide stable seating without requiring large floor space, suitable for apartment dining nooks and small kitchen dining areas | |
| Accent seating in entryways or living rooms | Stylized curved shell and warm mustard finish function as standalone accent seating for entry foyers or living room corners, providing temporary perching for guests | |
| Recommended Matching Desk Size | 2.4 m executive desk |
EU Market Access Requirements* EN Standards
| EN 12520:2015 Furniture - Strength, durability and safety - Requirements for domestic seating | Applicable for residential use of this dining armchair, sets minimum safety, strength and durability requirements for household seating furniture | |
|---|---|---|
| EN 1022:2018 Furniture - Seating - Determination of stability | Applicable for validating tip resistance of the splayed-leg design, specifies test methods for seating stability under normal use | |
| EN 15373:2007 Furniture - Strength, durability and safety - Requirements for non-domestic seating | Applicable if specified for light commercial use in cafes, break rooms or restaurants, sets higher performance requirements for higher-traffic environments |
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.1 General-Purpose Office Chairs |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 General technical requirements for wooden furniture | Applicable to the bentwood frame and structural components of this dining chair, sets requirements for dimensional tolerance, structural strength and finish quality for wooden residential furniture | |
|---|---|---|
| GB/T 16799-2008 Polyurethane leather for furniture | Applicable to the PU upholstery material, specifies minimum performance requirements for abrasion resistance, color fastness and tear strength for furniture-use faux leather | |
| GB 28007-2011 General technical requirements for children's furniture (if used in family dining settings) | Applicable if specified for household use with children, sets requirements for edge rounding, structural stability and harmful substance limits | |
| GB/T 10357.3-2013 Test of mechanical properties of furniture - Strength and durability of chairs and stools | Applicable for structural performance validation, specifies static load, impact and durability test methods for seating furniture | |
| GB 18584-2001 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture | Applicable to set formaldehyde emission limits for bentwood components and adhesive materials, ensuring indoor air quality compliance |
This product must meet the following technical requirements: 1. GB/T 3324-2017 General technical requirements for wooden furniture: Applicable to the bentwood frame and structural components of this dining chair, sets requirements for dimensional tolerance, structural strength and finish quality for wooden residential furniture; 2. GB/T 16799-2008 Polyurethane leather for furniture: Applicable to the PU upholstery material, specifies minimum performance requirements for abrasion resistance, color fastness and tear strength for furniture-use faux leather; 3. GB 28007-2011 General technical requirements for children's furniture (if used in family dining settings): Applicable if specified for household use with children, sets requirements for edge rounding, structural stability and harmful substance limits; 4. GB/T 10357.3-2013 Test of mechanical properties of furniture - Strength and durability of chairs and stools: Applicable for structural performance validation, specifies static load, impact and durability test methods for seating furniture; 5. GB 18584-2001 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture: Applicable to set formaldehyde emission limits for bentwood components and adhesive materials, ensuring indoor air quality compliance; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
