| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1800 x 900 x 750 mm | |
|---|---|---|
| Tabletop thickness | 38 mm | |
| Tabletop overhang (front/back) | 80 mm | |
| Tabletop overhang (left/right ends) | 120 mm | |
| Leg assembly footprint width | 720 mm | |
| Leg assembly footprint depth | 680 mm | |
| Metal leg section width | 50 mm | |
| Floor clearance from table underside | 712 mm | |
| Leg glide diameter | 20 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Net product weight | 52 kg | |
|---|---|---|
| Static uniform tabletop load capacity | 150 kg | |
| Point load per leg assembly | 80 kg | |
| Seating capacity | 6 people | |
| Vertical leg static load resistance | 1200 kg | |
| Surface abrasion resistance | 2000 cycles | |
| Suggested warranty period | 3 years | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop substrate | 38mm thick high-density MDF board | |
|---|---|---|
| Tabletop surface finish | Walnut wood veneer with matte polyurethane seal | |
| Tabletop edge treatment | Matched wood veneer edge banding with eased 2mm radius | |
| Support leg material | 2mm thick cold-rolled steel plate | |
| Leg surface finish | Matt black electrostatic powder coating | |
| Weld points | Full penetration welded joints at leg intersections | |
| Foot glides | Injection-molded black non-marking PP plastic with anti-slip base | |
| Joint hardware | M8 steel mounting bolts with locking washers | |
| Welded joints | Full penetration welded joints at all leg intersection points | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel |
Adjustment / rotation / tilt / mobility / storage features
| Fixed rigid structure | Fully assembled leg frames bolt permanently to tabletop underside with no folding or height adjustment, intended for permanent stationary placement | |
|---|---|---|
| Floor protection | Each leg terminates in a soft non-scuff glide that prevents scratching on wood, tile, and polished stone flooring, with 2mm height adjustment tolerance for uneven surfaces | |
| Seated knee clearance | 712mm vertical clearance under the full central span of the table, accommodating standard dining chair seat heights up to 480mm without leg obstruction | |
| Structural stability | Dual X-form leg assemblies distribute weight across 6 contact points (3 legs per support set) to reduce wobble on slightly uneven floors | |
| Surface utility | Matte sealed tabletop resists everyday liquid spills from food and beverages, suitable for casual dining and home office use without permanent staining under normal use | |
| Knock-down assembly | Tabletop and two leg assemblies ship disassembled for transport, requiring only a hex key to attach legs to pre-installed threaded inserts on the table underside | |
| Fixed stationary structure | Two fully welded X-leg frames bolt permanently to the tabletop underside with 8 M8 bolts, no folding, extension or height adjustment features, intended for permanent stationary placement | |
| Uneven floor adjustment | Each leg terminates in a non-scuff threaded glide that provides 2mm vertical height adjustment tolerance per foot to eliminate wobble on slightly uneven hard flooring | |
| Structural weight distribution | Dual X-form leg assemblies distribute tabletop load across 6 total floor contact points (3 contact points per support set) to reduce lateral wobble and concentrated floor pressure | |
| Spill-resistant surface | Matte polyurethane sealed veneer tabletop resists penetration from everyday cold food and beverage spills, allowing wipe-clean maintenance without permanent staining under normal dining use | |
| Knock-down flat-pack assembly | Tabletop and two pre-welded leg assemblies ship disassembled for transport, requiring only the included 4mm hex key to attach legs to pre-installed threaded inserts, no on-site welding or drilling required | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg |
Verified carton / gross weight / assembly / loading data
| Number of shipping packages | 1 | |
|---|---|---|
| Shipping carton dimensions | 1880 x 960 x 120 mm | |
| Gross shipping weight | 58 kg | |
| Packaging volume per unit | 0.217 CBM | |
| Assembly time per unit | 25 minutes | |
| 20ft GP container loading quantity | 124 units | |
| 40ft HQ container loading quantity | 306 units | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm |
Recommended spaces / users / usage modes
| Domestic dining rooms | Suitable for 6-person household dining spaces 3m x 3.5m or larger, fitting mid-century modern, industrial, and Scandinavian interior styles | |
|---|---|---|
| Open-plan kitchen and living areas | Low-profile X-leg design maintains visual openness in open-plan spaces, can double as a casual work from home desk when not used for meals | |
| Light commercial hospitality | Suitable for small cafes, boutique hotel breakfast areas, and co-working breakout spaces with daily light use, load rated for regular dining service | |
| Showroom and display use | Neutral walnut and black finish works as a display table in furniture showrooms, retail pop-ups, or gallery spaces for product presentation | |
| Recommended matching seating | Pairs with dining chairs with seat heights between 480 mm, including upholstered dining chairs, wooden spindle chairs, or metal frame industrial style chairs | |
| Showroom and pop-up display use | Neutral walnut and matte black finish works as a product display table in furniture showrooms, retail pop-ups, or gallery spaces for merchandise presentation |
EU Market Access Requirements* EN Standards
| Domestic furniture safety | EN 12521:2015 Furniture - Strength, durability and safety - Requirements for domestic tables | |
|---|---|---|
| Surface finish performance | EN 15186:2006 Furniture - Test for surface resistance to cold liquids | |
| Metal component finish | EN 10346:2015 Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions | |
| Domestic table safety standard | EN 12521:2015 Furniture - Strength, durability and safety - Requirements for domestic tables | |
| Surface cold liquid resistance | EN 15186:2006 Furniture - Test for surface resistance to cold liquids | |
| Steel substrate material standard | EN 10346:2015 Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions |
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.5 Desk and Table Products |
|---|
Standards applicable to China-market projects
| Table mechanical safety | GB/T 3324General technical requirements for wooden furniture | |
|---|---|---|
| Furniture surface durability | Recommended references: GB/T 4893.8 | |
| Formaldehyde emission | Recommended references: GB 18584 | |
| Wooden furniture general requirements | GB/T 3324General technical requirements for wooden furniture | |
| Formaldehyde emission limit | Recommended references: GB 18584 |
This product must meet the following technical requirements: 1. Table mechanical safety: GB/T 3324General technical requirements for wooden furniture; 2. Furniture surface durability: Recommended references: GB/T 4893.8; 3. Formaldehyde emission: Recommended references: GB 18584; 4. Wooden furniture general requirements: GB/T 3324General technical requirements for wooden furniture; 5. Formaldehyde emission limit: Recommended references: GB 18584; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
