| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 2400 x 1200 x 750 mm | |
|---|---|---|
| Tabletop thickness | 50 mm | |
| Seated knee clearance height | 700 mm | |
| Knee clearance depth under table | 450 mm | |
| Left support panel dimensions | 700 x 600 x 50 mm | |
| Right support panel dimensions | 900 x 700 x 50 mm | |
| Tabletop edge radius | 2 mm | |
| Clear floor space under table center | 1000 mm | |
| Table overhang front/back | 100 mm | |
| Table overhang left/right ends | 300 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Product net weight | 135 kg | |
|---|---|---|
| Distributed tabletop static load capacity | 300 kg | |
| Support panel vertical static load per side | 180 kg | |
| Recommended seating capacity | 8 people | |
| Surface horizontal scratch resistance | 2000 cycles | |
| Floor contact point load rating | 150 kg per support | |
| Wood core moisture content | 12% | |
| Finish dry film thickness | 0.2 mm | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop core | 25mm thick MDF substrate with 25mm built-up edge | |
|---|---|---|
| Tabletop surface finish | High-gloss white UV-cured lacquer | |
| Support panel core | 50mm thick engineered wood panel | |
| Support panel finish | Matching high-gloss white lacquer | |
| Floor contact pads | Non-slip rubber glides | |
| Panel joining hardware | Zinc-plated steel connector bolts and cam locks | |
| Edge banding | Matching high-gloss PVC edge banding | |
| Mounting pilot points | Pre-drilled 10mm depth alignment holes | |
| Internal bracing | 2mm thick steel connecting brackets | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel |
Adjustment / rotation / tilt / mobility / storage features
| Freestanding installation | No wall fixing required, self-supporting via two offset angled panels | |
|---|---|---|
| Central cable management clearance | Open under-table cavity allows under-table cable tray mounting | |
| Multi-side seating access | Unobstructed perimeter allows chair placement on all four table sides | |
| Surface wipe cleaning | Non-porous high-gloss finish allows cleaning with standard office disinfectant wipes | |
| Static level adjustment | Optional adjustable glides at base of support panels compensate for 10mm floor unevenness | |
| Accessory compatibility | Tabletop supports mounting of monitor arms, tabletop power modules and conference microphones | |
| Edge impact resistance | Built-up 50mm tabletop edge withstands 100mm drop impact of 1kg hard object without edge chipping | |
| Lateral stability | Offset Z-base design resists 150N horizontal side force at tabletop edge without tipping | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Number of packages | 3 | |
|---|---|---|
| Largest carton dimensions | 2500 x 1300 x 100 mm | |
| Support panel carton dimensions | 950 x 750 x 120 mm | |
| Total shipping gross weight | 155 kg | |
| Total shipping volume | 0.45 CBM | |
| Assembly time | 40 minutes | |
| 20ft GP container loading quantity | 58 units | |
| 40ft HQ container loading quantity | 142 units | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set |
Recommended spaces / users / usage modes
| Small to medium office conference rooms | Seats 8 people for team meetings, client presentations and internal discussions, modern high-gloss finish complements contemporary office interiors | |
|---|---|---|
| Open plan office collaborative zones | Freestanding design allows flexible placement without wall fixing, supports ad-hoc team work and quick project meetings | |
| Executive office meeting areas | Clean minimalist aesthetic pairs with executive desk sets, suitable for small leadership meetings and guest consultations | |
| Training room temporary work surface | Smooth durable surface supports training materials, laptops and presentation equipment, easy to clean between sessions | |
| Co-working space meeting pods | Neutral white finish suits flexible co-working environments, accommodates different user groups without clashing with varied decor | |
| Furniture showroom display | Distinctive angled Z-base design serves as a focal display piece for modern office furniture collections | |
| Corporate training rooms | Smooth durable surface supports training materials, laptops and presentation equipment, easy to clean between consecutive training sessions |
EU Market Access Requirements* EN Standards
| EN 527-2:2002 Office furniture - Worktables and desks - Safety requirements | Applicable as safety reference for structural stability, edge radius and load capacity for commercial office use | |
|---|---|---|
| EN 15372:2016 Furniture - Strength, durability and safety - Requirements for non-domestic tables | Applicable as durability reference for commercial conference room use, covering static load and impact resistance | |
| EN 13722:2004 Furniture - Assessment of surface resistance to abrasion | Applicable as reference for high-gloss surface wear performance for high-frequency meeting space use |
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.5 Desk and Table Products |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 General technical requirements for wooden furniture | Applicable as acceptance reference for panel material quality, dimensional tolerance and edge finishing for this wood-based office table | |
|---|---|---|
| GB/T 4893.1-2021 Test method for surface resistance to cold liquids | Applicable as acceptance reference for tabletop stain resistance to common office liquids including coffee, water and cleaning agents | |
| GB/T 4893.8-2013 Test method for surface wear resistance | Applicable as acceptance reference for high-gloss tabletop coating durability under regular office use | |
| GB/T 10357.1-2013 Test of mechanical properties for furniture - Tables | Applicable as acceptance reference for table static load, stability and impact strength performance |
This product must meet the following technical requirements: 1. GB/T 3324-2017 General technical requirements for wooden furniture: Applicable as acceptance reference for panel material quality, dimensional tolerance and edge finishing for this wood-based office table; 2. GB/T 4893.1-2021 Test method for surface resistance to cold liquids: Applicable as acceptance reference for tabletop stain resistance to common office liquids including coffee, water and cleaning agents; 3. GB/T 4893.8-2013 Test method for surface wear resistance: Applicable as acceptance reference for high-gloss tabletop coating durability under regular office use; 4. GB/T 10357.1-2013 Test of mechanical properties for furniture - Tables: Applicable as acceptance reference for table static load, stability and impact strength performance; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
