| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall footprint (fully open) | 3000 x 3000 x 2700 mm | |
|---|---|---|
| Canopy octagonal diameter | 3000 mm | |
| Cross base footprint | 1000 x 1000 mm | |
| Main support pole diameter | 68 mm | |
| Offset support arm diameter | 50 mm | |
| Main pole wall thickness | 2.0 mm | |
| Support rib profile | 14 x 24 mm, 1.0 mm thick | |
| Rib count | 8 ribs | |
| Canopy fabric thickness | 270 gsm | |
| Open under-canopy clearance | 2200 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Net product weight | 30 kg | |
|---|---|---|
| Recommended total base ballast weight | 150 kg | |
| UV protection rating | UPF 50+ | |
| Fabric water repellency | Light rain resistance, 300 mm water column | |
| Wind resistance rating | Gusts up to 38 km/h | |
| Fabric colorfastness lifespan | 3 years | |
| Frame rust resistance lifespan | 5 years | |
| Mechanism cycle rating | 1000 open/close cycles | |
| Standard limited warranty | 3 years | |
| Reference Static Load | 150 kg depending on category |
Core acceptance fields · Panels / hardware / frame / upholstery
| Main support pole | Powder-coated aluminum with wood-grain finish | |
|---|---|---|
| Offset cantilever arm | Powder-coated aluminum with matching wood-grain finish | |
| Canopy outer surface | 270 gsm solution-dyed polyester, light orange | |
| Canopy inner surface | 270 gsm solution-dyed polyester, bright red-orange | |
| Support ribs | Black powder-coated steel, 8 total | |
| Apex wind vent | Matching two-tone polyester mesh flap | |
| Cross base | Black powder-coated steel four-prong frame | |
| Crank and tilt hardware | Zinc-plated steel with black finish | |
| Storage fastener | Velcro fabric strap | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Canopy operation | Manual crank handle for smooth open and close | |
|---|---|---|
| Tilt adjustment | Lockable crank tilt with 5 preset positions | |
| Rotation function | 360-degree foot-pedal controlled rotation | |
| Base compatibility | Accepts sand/water filled weights or concrete pavers on cross prongs | |
| Canopy venting | Built-in apex wind vent reduces uplift and air pressure | |
| Closed storage | Compact folded profile with velcro strap to secure fabric | |
| Assembly requirement | Two-section pole and arm assembly with bolted hardware | |
| Tilt adjustment range | 35 degrees | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Residential patio use | Suitable for backyard decks, poolside areas and garden seating sets | |
|---|---|---|
| Light commercial outdoor use | Appropriate for cafe sidewalk seating, hotel terrace lounge areas | |
| Hard surface placement | Designed for concrete, stone or paved patios | |
| 4-6 person shading capacity | Covers standard 6-seat patio dining set or 4 lounge chairs | |
| All-season outdoor storage | Compatible with standard umbrella protective covers | |
| Sun-tracking shade adjustment | Tilt and rotation functions adjust shade throughout daylight hours |
EU Market Access Requirements* EN Standards
| Outdoor furniture mechanical safety | EN 581:2015 | |
|---|---|---|
| Textile UV protection testing | EN 13758:2001+A1:2006 |
Standards applicable to China-market projects
| Outdoor furniture fabric UV resistance | GB/T 18830 | |
|---|---|---|
| Metal furniture coating adhesion | GB/T 9286 | |
| Outdoor furniture structural safety | GB 28007 |
This product must meet the following technical requirements: 1. Outdoor furniture fabric UV resistance: GB/T 18830; 2. Metal furniture coating adhesion: GB/T 9286; 3. Outdoor furniture structural safety: GB 28007; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
