| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions (open) | 3000 x 3000 x 2700 mm | |
|---|---|---|
| Center pole diameter | 48 mm | |
| Canopy edge height above ground | 2100 mm | |
| Top vent canopy size | 600 x 600 mm | |
| Rib length per side | 1500 mm | |
| Crank handle height above ground | 1100 mm | |
| Finial height above canopy hub | 80 mm | |
| Pole section length (per piece) | 1400 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Product net weight (without base) | 15 kg | |
|---|---|---|
| Recommended weighted base weight | 50 kg | |
| Recommended user capacity | 6 people | |
| Fabric UV protection rating | UPF 50+ | |
| Tilt angle range | 45 degrees | |
| Fabric colorfastness life | 1000 hours | |
| Wind speed rating for secure operation | 38 km/h | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Main canopy fabric | 280 gsm solution-dyed polyester with PU waterproof coating | |
|---|---|---|
| Top vent canopy | Matching polyester fabric with reinforced stitched seams | |
| Center support pole | 1.2 mm thick powder-coated aluminum with brushed silver finish | |
| Support ribs | 0.8 mm thick powder-coated steel ribs, 8 total ribs | |
| Crank and tilt hardware | Zinc-plated steel crank mechanism with ABS plastic handle | |
| Hub and connector fittings | Glass-reinforced nylon hub and rib connectors | |
| Top finial | Die-cast aluminum decorative finial with matching powder coat | |
| Seam and stitching details | UV-resistant polyester thread with 8 stitches per inch seam pitch | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Canopy lift operation | Hand crank lift opens and closes canopy smoothly with 8 full crank rotations | |
|---|---|---|
| Tilt adjustment | Push-button collar tilt adjusts canopy angle up to 45 degrees to block low-angle sun | |
| Wind ventilation | Double-vented top canopy allows upward airflow to reduce wind lift and frame stress | |
| Knockdown assembly | Two-piece pole design allows tool-free assembly without specialized hardware | |
| Table compatibility | Fits standard patio umbrella tables with 50 mm or larger center pole holes | |
| Collapse function | Canopy fully collapses against the pole for compact storage during storms or off-season | |
| Height adjustment | Two-position height setting adjusts canopy height by 100 mm for variable clearance | |
| Tilt pivot point height | 1900 mm | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Residential patio use | Shades outdoor dining sets, lounge seating for home gardens, courtyards and pool decks | |
|---|---|---|
| Commercial outdoor seating | Suitable for cafe, restaurant and hotel outdoor seating areas requiring durable sun protection | |
| Market stall and event use | Provides shade for outdoor market stalls, pop-up events and community fair booths | |
| Courtyard and public plaza use | Appropriate for public park seating areas, apartment complex courtyards and campus outdoor spaces | |
| Recommended configuration | Pair with 50kg marble or concrete weighted base, outdoor dining set for 6 people | |
| Installation note | Place on flat, level hardscape surfaces; close and secure during high wind or thunderstorms |
EU Market Access Requirements* EN Standards
| EN 13758-1:2001+A1:2006 | Textile UV protection standard applicable for canopy sun protection testing | |
|---|---|---|
| EN 1176-1:2017 | Outdoor furniture safety standard applicable for structural stability verification |
Standards applicable to China-market projects
| GB/T 21196.2-2007 | Fabric abrasion resistance test method applicable for canopy textile durability verification | |
|---|---|---|
| GB/T 18830-2009 | Textile UV protection performance standard applicable for UPF rating verification | |
| GB/T 1766-2008 | Paint and coating weathering resistance standard applicable for frame finish durability verification |
This product must meet the following technical requirements: 1. GB/T 21196.2-2007: Fabric abrasion resistance test method applicable for canopy textile durability verification; 2. GB/T 18830-2009: Textile UV protection performance standard applicable for UPF rating verification; 3. GB/T 1766-2008: Paint and coating weathering resistance standard applicable for frame finish durability verification; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
