| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions (canopy x total height) | 3000 x 3000 x 2600 mm | |
|---|---|---|
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Recommended base weight (filled, for wind stability) | 120 kg | |
|---|---|---|
| Canopy wind resistance rating (properly anchored) | 39 km/h | |
| Fabric UV protection factor (UPF) | 50+ | |
| Water column pressure resistance of canopy | 300 mm | |
| Product net weight (without filled base weights) | 28 kg | |
| Recommended maximum seating coverage | 6 people | |
| Tilt mechanism crank operating cycles | 3000 cycles | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Canopy outer/top surface | 250gsm solution-dyed polyester with PU water-repellent coating | |
|---|---|---|
| Canopy inner/underside surface | Matte taupe solution-dyed polyester, double-stitched seams | |
| Internal support ribs | 18mm diameter powder-coated steel ribs, 8 total ribs | |
| Vertical support pole | 76mm diameter matte gray powder-coated aluminum, 1.8mm wall thickness | |
| Cantilever support arms | Rectangular powder-coated aluminum arms with reinforced joint brackets | |
| Tilt and crank mechanism | Die-cast aluminum housing with steel crank handle and internal gear set | |
| Cross base frame | Galvanized steel cross arms with powder-coated gray finish, designed for weighted slab or sandbag installation | |
| Canopy top vent | Mesh-reinforced polyester wind vent at canopy apex | |
| Joint hardware | Stainless steel bolts and locking knobs for angle adjustment | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| 360-degree canopy rotation | Foot-activated rotation lock allows full 360-degree horizontal repositioning of shade without moving the base | |
|---|---|---|
| Crank-operated tilt adjustment | Manual crank adjusts canopy tilt angle up to 45 degrees from vertical to block low-angle sun | |
| Easy open/close operation | Integrated crank mechanism opens and closes canopy smoothly in 12 full crank rotations | |
| Cross base weight compatibility | Base accepts four separate 30kg concrete or resin weight plates on cross arms for stable anchoring | |
| Wind vent pressure relief | Apex wind vent reduces canopy uplift in gusty conditions by allowing air flow through the top of the canopy | |
| Canopy angle locking | Automatic angle lock secures canopy at 5 preset tilt positions to prevent unintended movement | |
| Removable canopy for cleaning | Canopy attaches to ribs via fabric pockets and velcro straps for easy removal and machine washing | |
| Tilt adjustment arm length | 900 mm | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Shipping carton dimensions (L x W x H) | 1550 x 320 x 180 mm | |
|---|---|---|
| Gross shipping weight (without base weights) | 32 kg | |
| Assembly time (2 people, basic tools included) | 35 minutes | |
| 20ft GP container loading quantity | 310 units | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Residential patios and backyards | Provides flexible shade over outdoor dining sets, lounge seating, or hot tub areas without center pole obstruction | |
|---|---|---|
| Commercial outdoor cafe seating | Covers small bistro table groupings for restaurant sidewalk or patio dining areas | |
| Poolside lounge areas | UV-resistant water-repellent canopy blocks sun over chaise lounge seating near swimming pools | |
| Balcony and rooftop terrace use | Compact cross base fits on paved elevated outdoor surfaces without permanent installation | |
| Garden event temporary shade | Portable design supports temporary setup for backyard parties, barbecues, or small outdoor events | |
| Seasonal outdoor storage compatibility | Folds compactly for vertical storage in garages or garden sheds during off-season months |
EU Market Access Requirements* EN Standards
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
