| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall assembled dimensions | 3500 x 3500 x 2700 mm | |
|---|---|---|
| Support arm major cross-section | 100 mm | |
| Stainless steel extension arm diameter | 60 mm | |
| Internal support rib count | 8 pieces | |
| Support rib cross-section | 25 x 17 mm | |
| Canopy edge clearance above paved surface | 2100 mm | |
| Rotating base plate diameter | 450 mm | |
| Crank handle length | 120 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Total assembled weight with 2-piece counterweight set | 108 kg | |
|---|---|---|
| Individual counterweight slab weight | 20 kg | |
| Recommended maximum static load capacity for frame | 160 kg | |
| Canopy fabric weight | 250 gsm | |
| Fabric UV protection rating | UPF 50+ | |
| Recommended maximum safe wind speed for use | 24 km/h | |
| Frame and mechanism durability cycle rating | 3000 open/close cycles | |
| Standard product warranty period | 2 years | |
| Individual counterweight slab dimensions | 660 x 480 x 57 mm | |
| Reference Static Load | 150 kg depending on category |
Core acceptance fields · Panels / hardware / frame / upholstery
| Canopy fabric | 250gsm PA-coated black polyester | |
|---|---|---|
| Offset support arm | Brushed finish stainless steel | |
| Main vertical support pole | Powder-coated aluminum alloy | |
| Internal canopy ribs | Rectangular extruded aluminum | |
| Rotating joint hardware | Stainless steel bolts and bushings | |
| Lower base plate | Powder-coated steel cross base | |
| Counterweight slabs | High-density composite concrete with wear-resistant coating | |
| Crank mechanism housing | Zinc alloy with stainless steel crank handle | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Canopy opening and closing | Manual crank operation, smooth gear-driven lift | |
|---|---|---|
| Canopy horizontal rotation | 360 degree infinite rotation with 16 lock positions | |
| Canopy tilt adjustment | 45 degree maximum angle tilt via slide lock mechanism | |
| Base stability system | Two removable counterweight slabs locking to steel cross base | |
| Canopy venting | Single top air vent to reduce wind lift | |
| Storage tie strap | Integrated fabric strap to secure folded canopy when not in use | |
| Disassembly for storage | Tool-free separation of canopy, arm and base sections | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Assembly note | Engineering for preliminary quoting, not supplier measured data | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Residential patio application | Suitable for backyard, terrace or poolside seating areas, covers 4-seat dining set | |
|---|---|---|
| Commercial outdoor dining use | Ideal for cafe, restaurant or beer garden outdoor seating zones | |
| Hard surface installation | Designed for placement on concrete, stone or paved patio surfaces | |
| All-weather outdoor placement | Suitable for year-round outdoor use in temperate climates | |
| User configuration | Provides shade for up to 6 people seated around a standard outdoor dining set | |
| Installation requirement | Two-person assembly recommended for safe positioning of weighted base and frame |
EU Market Access Requirements* EN Standards
| Outdoor furniture mechanical safety | EN 581 |
|---|
Standards applicable to China-market projects
| Outdoor furniture safety requirement | GB 28478 | |
|---|---|---|
| Textile UV performance | GB/T 18830 | |
| Metal coating corrosion resistance | GB/T 1865 |
This product must meet the following technical requirements: 1. Outdoor furniture safety requirement: GB 28478; 2. Textile UV performance: GB/T 18830; 3. Metal coating corrosion resistance: GB/T 1865; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
