| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 500 x 500 x 500 mm | |
|---|---|---|
| Tabletop diameter | 500 mm | |
| Tabletop edge thickness | 30 mm | |
| Waist section diameter | 120 mm | |
| Base maximum width | 410 mm | |
| Base footprint depth | 410 mm | |
| Stubby leg support height | 80 mm | |
| Under-table floor clearance | 0 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Tabletop static load capacity | 15 kg | |
|---|---|---|
| Product net weight | 12 kg | |
| Finish scratch resistance | Level 2 for residential indoor use | |
| Surface water resistance | Wipe-clean, resistant to cold beverage spills | |
| Structural joint durability | 10000+ hour static load life | |
| Stability tilt threshold | 15 degree lateral tilt before tipping | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Main structural body | Molded fiberglass-reinforced resin | |
|---|---|---|
| Surface finish | High-gloss UV-cured pink lacquer | |
| Tabletop surface | Level, seamless non-porous top | |
| Base contact points | Smooth finished resin feet | |
| Internal reinforcement | Concealed weighted core | |
| Finish coating thickness | 0.8 mm | |
| Edge treatment | Fully rounded seamless edges | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Construction type | Fully assembled single-piece monolithic structure | |
|---|---|---|
| Primary use function | Holds beverages, small books, and decorative objects beside seating | |
| Surface maintenance | Wipe-clean with soft damp cloth | |
| Placement suitability | Indoor dry residential and commercial spaces | |
| Floor protection | Smooth non-abrasive base contact points | |
| Secondary decorative function | Serves as standalone pop art sculptural accent | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Living room placement | Position beside sofas, lounge chairs, or sectionals for holding drinks and reading materials | |
|---|---|---|
| Bedroom use | Serve as a whimsical nightstand next to beds for holding table lamps and personal items | |
| Commercial accent use | Place in lounge areas, creative offices, or retail display spaces as decorative functional accent | |
| Children's room suitability | Rounded edges and stable base provide safe use in kid-friendly spaces | |
| Recommended complementary pairing | Match with low-profile modular sofas, boucle lounge chairs, or pastel-toned soft seating |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture - Strength, durability and safety for domestic tables, applicable for load and stability testing | |
|---|---|---|
| EN 15372:2008 | Furniture - Durability of surfaces for furniture, applicable for finish wear and stain resistance verification |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for dimensional and structural stability verification | |
|---|---|---|
| GB 18584-2001 | Indoor decorating and refurbishing materials - limit of harmful substances for wooden furniture, applicable for formaldehyde and heavy metal emission checks |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for dimensional and structural stability verification; 2. GB 18584-2001: Indoor decorating and refurbishing materials - limit of harmful substances for wooden furniture, applicable for formaldehyde and heavy metal emission checks; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
