| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 410 x 410 x 550 mm | |
|---|---|---|
| Tabletop diameter | 410 mm | |
| Tabletop tray lip height | 35 mm | |
| Base bottom diameter | 280 mm | |
| Base top connection diameter | 120 mm | |
| Under-table floor clearance | 0 mm | |
| Surface coating thickness | 0.8 mm | |
| Tray inner usable diameter | 360 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Static top load capacity | 45 kg | |
|---|---|---|
| Net product weight | 8 kg | |
| Top surface impact resistance | 1.2 J | |
| Finish abrasion resistance | 400 cycles | |
| Per-unit art variation | 100% | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Main structural body | Fiberglass-reinforced composite | |
|---|---|---|
| Surface finish | High-gloss UV-cured lacquer | |
| Tabletop motif | Hand-applied multi-color paint | |
| Base underside pad | 3 mm thick felt floor protector | |
| Tabletop lip construction | Integrally molded raised edge | |
| Pedestal core structure | Solid filled composite | |
| Paint seal coat | Clear glossy topcoat | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Item containment | Raised 35mm tray lip prevents small items from sliding off the tabletop | |
|---|---|---|
| Stability design | Wider bottom pedestal base reduces tipping risk when loaded on level floors | |
| Floor protection | Felt contact pads eliminate scratches on hard flooring during placement | |
| Surface maintenance | Non-porous glossy finish allows wipe-clean care with soft dry cloth | |
| Assembly requirement | Fully assembled single-piece unit, no on-site hardware installation needed | |
| Placement adaptability | Compact footprint fits beside sofas, lounge chairs, or bedroom reading nooks | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Residential living room placement | Position beside sofas or armchairs to hold drinks, books, or small decor | |
|---|---|---|
| Contemporary art space use | Functions as a sculptural accent piece in pop art or modern eclectic interiors | |
| Bedroom side placement | Sits next to beds as a decorative nightstand for small personal items | |
| Lounge and waiting area use | Complements lounge seating in creative office or boutique reception spaces | |
| Hard floor compatibility | Suitable for tile, wood, and polished concrete floors with felt base pads | |
| Small space furnishing | Fits compact studio or apartment layouts with minimal floor footprint |
EU Market Access Requirements* EN Standards
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
