| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 460 x 460 x 610 mm | |
|---|---|---|
| Tabletop diameter | 460 mm | |
| Tabletop edge thickness | 40 mm | |
| Upper pedestal section height | 280 mm | |
| Upper pedestal bottom diameter | 390 mm | |
| Lower pedestal section height | 290 mm | |
| Base floor contact diameter | 380 mm | |
| Undertable floor clearance | 20 mm | |
| Tabletop overhang from upper pedestal | 35 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Tabletop static load capacity | 113 kg | |
|---|---|---|
| Product net weight | 14 kg | |
| Finish scratch resistance rating | Class 1 | |
| Finish stain resistance | Grade 4 | |
| Base stability tip-over angle | 18 degrees | |
| Surface vertical impact resistance | 2 J | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Structural substrate | Fiberglass-reinforced polymer composite | |
|---|---|---|
| Surface finish | Piano baked high-gloss UV lacquer | |
| Color coating | Dark olive green monolithic finish | |
| Tabletop edge treatment | Smooth rounded polished edge | |
| Base bottom contact pad | Anti-scratch felt glide | |
| Finish coating thickness | 0.2 mm | |
| Internal structural reinforcement | Integral molded composite ribbing | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Support structure | Single central stacked dual-cone pedestal | |
|---|---|---|
| Tabletop use case | Flat level surface for lamps, drinks, books or decorative objects | |
| Mobility feature | Lightweight solid construction for easy repositioning | |
| Storage provision | No integrated shelves, drawers or compartments | |
| Adjustment feature | No height, tilt or rotation adjustment capability | |
| Surface maintenance | Non-porous wipe-clean glossy surface | |
| Floor protection | Integrated bottom glides prevent hard base scratching flooring | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Carton dimensions | 550 x 550 x 650 mm | |
|---|---|---|
| Gross weight per carton | 16 kg | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Living room sofa side placement | Position beside upholstered sofas or lounge chairs for beverage and accessory placement | |
|---|---|---|
| Bedroom nightstand use | Place beside beds as a compact sculptural nightstand for lamps and personal items | |
| Commercial lounge placement | Install in hotel lobbies, lounge areas and showroom spaces for modern accent styling | |
| Entryway accent use | Position in entry foyers to hold keys, decor and small personal items | |
| Display stand application | Use as a raised pedestal for small sculptural objects, plants or art pieces | |
| Balcony indoor use only | Suitable for enclosed indoor balcony spaces, not for unprotected outdoor exposure |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture strength, durability and safety requirements for domestic tables | |
|---|---|---|
| EN 15187:2006 | Furniture test method for assessment of surface gloss retention after use |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for lacquered composite indoor tables | |
|---|---|---|
| GB/T 4893.1-2021 | Surface wear resistance test method for furniture coatings, recommended for finish acceptance |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for lacquered composite indoor tables; 2. GB/T 4893.1-2021: Surface wear resistance test method for furniture coatings, recommended for finish acceptance; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
