| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 693 x 693 x 419 mm | |
|---|---|---|
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Net weight | 48.5 kg | |
|---|---|---|
| Distributed static tabletop load | 50 kg | |
| Base floor contact area | 1134 cm² | |
| Surface stain resistance rating | Level 4 | |
| Surface scratch resistance | 3000 cycles | |
| Structure stability tilt angle | 15 degrees | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop panel | 20mm natural white/black marble or sintered stone slab | |
|---|---|---|
| Tabletop rim trim | 1.2mm polished gold-plated stainless steel | |
| Central connecting collar | Brushed gold-plated steel cylinder | |
| Conical pedestal base | 1.5mm matte black or polished gold iron tube | |
| Base bottom foot pads | 5mm non-slip silicone rubber pads | |
| Assembly hardware | M8 zinc-plated steel bolts | |
| Surface finish coating | 0.08mm clear polyurethane sealer | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
Adjustment / rotation / tilt / mobility / storage features
| Structural design | Fixed single central pedestal support with no legs extending to table edges | |
|---|---|---|
| Assembly requirement | Partial knockdown assembly with pre-drilled mounting holes | |
| Floor protection | Non-slip silicone pads installed on base bottom | |
| Storage configuration | Open fixed design with no drawers, lift tops or lower shelves | |
| Surface functionality | Heat-resistant sealed top supports placement of hot drink ware up to 120°C | |
| Placement adaptability | Freestanding design works for central living room placement or paired nested set use | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Primary application space | Residential living room central placement on area rugs | |
|---|---|---|
| Secondary use case | Lounge or hotel reception area accent table placement | |
| Matching configuration | Paired nested set of two finish variants for layered styling | |
| Target user group | Consumers seeking modern luxury minimalist living room furniture | |
| Care requirement | Wipe-clean sealed stone top suitable for daily residential use |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Domestic furniture strength, durability and safety requirements for tables | |
|---|---|---|
| EN 15372:2008 | Furniture surface resistance to dry heat for residential table tops | |
| EN 14749:2016 | Domestic storage and table furniture safety requirements for hardware stability |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for stone-top table structural safety | |
|---|---|---|
| GB/T 4893.1-2005 | Furniture surface test for cold liquid resistance, applicable for sealed tabletop finish | |
| GB/T 4893.8-2013 | Furniture surface abrasion resistance test method, applicable for top finish durability | |
| GB/T 10357.1-2013 | Furniture mechanical performance test for tables, applicable for static load and stability |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for stone-top table structural safety; 2. GB/T 4893.1-2005: Furniture surface test for cold liquid resistance, applicable for sealed tabletop finish; 3. GB/T 4893.8-2013: Furniture surface abrasion resistance test method, applicable for top finish durability; 4. GB/T 10357.1-2013: Furniture mechanical performance test for tables, applicable for static load and stability; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
