| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 800 x 800 x 400 mm | |
|---|---|---|
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Table top static load capacity | 30 kg | |
|---|---|---|
| Product net weight | 42 kg | |
| Glass impact resistance grade | Class C | |
| Edge load bearing capacity | 10 kg | |
| Recommended maximum placemat weight | 5 kg | |
| Surface scratch hardness | 6H | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Table top panel | 12mm clear tempered float glass | |
|---|---|---|
| Vertical support panels | 12mm clear tempered float glass | |
| Panel joint adhesive | Structural neutral cure silicone | |
| Edge finish | Polished dark inked edge | |
| Glass surface finish | Smooth float polished finish | |
| Base contact pads | 3mm transparent silicone anti-slip pads | |
| Tempered stress layer | Compression stress layer ≥90MPa | |
| Glass light transmittance | 91% | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Structural support | Vertical glass panels carry top load without separate metal frames | |
|---|---|---|
| Surface placement | Flat top supports books, decor and beverage service items | |
| Cleaning access | Open under-table space allows full floor cleaning around and beneath the table | |
| Floor protection | Silicone contact pads prevent glass-to-floor scratches and reduce sliding | |
| Visual design feature | Isometric cube geometry creates optical geometric visual effect | |
| Assembly requirement | Factory-bonded joint construction arrives as a single fully assembled unit | |
| Edge safety | Polished rounded edges eliminate sharp cut points on all exposed glass perimeters | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Modern living room placement | Positioned in front of sofas in minimalist contemporary residential interiors | |
|---|---|---|
| Lounge and waiting area use | Installed in office reception lounges and creative studio waiting zones | |
| Contemporary gallery display | Used as a display plinth for art objects in gallery or retail pop-up settings | |
| Small apartment application | Suitable for compact urban apartments where transparent furniture reduces visual bulk | |
| Design showroom display | Featured in furniture showrooms as a statement geometric design piece | |
| Open-plan office breakout space | Placed in casual office breakout areas for informal beverage and laptop use |
EU Market Access Requirements* EN Standards
| Glass furniture safety standard | EN 12150:2015+A1:2019 | |
|---|---|---|
| Furniture stability standard | EN 14073:2004 | |
| Glass surface durability standard | EN 1096:2012 |
US and Canada office-furniture standards
| Low table load standard | ANSI/BIFMA X2021 |
|---|
Standards applicable to China-market projects
| Glass material standard | GB 15763.2 | |
|---|---|---|
| Furniture safety standard | GB 28007 | |
| Glass edge processing standard | GB/T 34328 |
This product must meet the following technical requirements: 1. Glass material standard: GB 15763.2; 2. Furniture safety standard: GB 28007; 3. Glass edge processing standard: GB/T 34328; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
