| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall assembled dimensions | 840 x 500 x 900 mm | |
|---|---|---|
| Worktop thickness | 25 mm | |
| Door panel thickness | 18 mm | |
| Carcass side panel thickness | 16 mm | |
| Back panel thickness | 3 mm | |
| Toe kick height | 100 mm | |
| Single door width | 400 mm | |
| Door height | 700 mm | |
| Accent trim thickness | 20 mm | |
| Interior shelf depth | 460 mm | |
| Shelf adjustment hole spacing | 32 mm | |
| Side panel corner radius | 50 mm | |
| Carcass Panel Thickness | 25 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Top surface static load capacity | 36 kg | |
|---|---|---|
| Door hinge open angle | 110 degrees | |
| Hinge cycle rating | 80000 cycles | |
| Laminate surface abrasion resistance | 300 revolutions | |
| Anti-tip connector load rating | 50 kg | |
| Assembled product weight | 30 kg | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Carcass construction | 16mm particle board core with matte taupe laminate finish | |
|---|---|---|
| Worktop surface | 25mm MDF core with light oak grain laminate overlay | |
| Door panels | 18mm MDF core with matte light taupe laminate, handleless push-to-open edge | |
| Accent trim | PVC edge banding in warm brown finish | |
| Back panel | 3mm hardboard with matte light taupe finish | |
| Hardware components | Zinc-plated steel concealed hinges, plastic shelf supports, steel anti-tip bracket |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Door operation | Push-to-open handleless mechanism with magnetic catch | |
|---|---|---|
| Interior storage configuration | 1 adjustable shelf dividing cavity into two storage compartments | |
| Wall anchoring | Included anti-tip bracket secures cabinet to wall to prevent tipping | |
| Surface maintenance | Wipe-clean laminate surfaces resistant to common household spills |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Home office storage | Fits under standard work surfaces for office supply and document concealment | |
|---|---|---|
| Living room accent storage | Provides concealed media accessory and household item storage beside seating areas |
EU Market Access Requirements* EN Standards
| EN 14749:2016 | Safety and strength requirements for domestic and kitchen storage units and worktops | |
|---|---|---|
| EN 12521:2015 | Strength, durability and safety requirements for domestic storage furniture |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for domestic/office storage cabinet quality inspection | |
|---|---|---|
| GB 18584-2001 | Indoor decorating and refurbishing materials - limit of harmful substances for wooden furniture, formaldehyde emission check |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for domestic/office storage cabinet quality inspection; 2. GB 18584-2001: Indoor decorating and refurbishing materials - limit of harmful substances for wooden furniture, formaldehyde emission check; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp
