| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1440 x 480 x 1840 mm | |
|---|---|---|
| Upper open shelf internal height | 610 mm | |
| Lower sliding door compartment internal height | 1230 mm | |
| Upper open shelf internal depth | 450 mm | |
| Lower compartment internal depth | 450 mm | |
| Individual sliding door width | 720 mm | |
| Door panel thickness | 18 mm | |
| Carcass side panel thickness | 16 mm | |
| Back panel thickness | 5 mm | |
| Adjustable shelf thickness | 16 mm | |
| Base plinth height | 60 mm | |
| Top trim thickness | 20 mm | |
| Carcass Panel Thickness | 25 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
| Shelf static load capacity | 115 kg | |
|---|---|---|
| Recommended maximum user weight for top surface use | 50 kg | |
| Anti-tip wall anchor pull-out resistance | 50 kg | |
| Sliding door cycle durability | 50000 open/close cycles | |
| Net product weight | 62 kg | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points | |
| Recommended Procurement Warranty | Carcass 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Main carcass frame | 16mm laminated particleboard, light gray/off-white matte finish | |
|---|---|---|
| Lower sliding doors | 18mm fluted MDF, dark charcoal gray matte textured finish | |
| Upper open shelf interior | 16mm laminated MDF, dark gray smooth matte finish | |
| Sliding door tracks | 1.2mm thick cold-rolled steel, powder-coated dark gray finish | |
| Back panel | 5mm hardboard, dark gray matte finish, stapled to carcass rear | |
| Adjustable interior shelves | 16mm laminated particleboard, dark gray finish, metal shelf pins | |
| Edge banding | 1mm thick PVC edge banding, color-matched to adjacent panels | |
| Base plinth and top trim | 18mm laminated MDF, matching dark charcoal and light frame finish | |
| Edge Band Thickness | 2 mm | |
| Primary Connector Specification | Reference M6-M8 cam/bolt fittings with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Lower compartment access | Double sliding doors on horizontal metal tracks, no external handles | |
|---|---|---|
| Interior shelf adjustability | 2 adjustable shelves in lower compartment, 50mm height increments via pin holes | |
| Open storage access | Full-width open upper shelf, no door, immediate access for frequently used items | |
| Anti-tip safety | 2 wall-mounted anti-tip anchors included to secure unit to wall studs | |
| Floor protection | 4 non-slip EVA pads affixed to base corners to prevent floor scratching | |
| Door alignment | Integrated plastic door guides to keep sliding doors aligned during operation | |
| Cable / Vent Opening Reference | If fitted, 80 mm diameter |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
Recommended spaces / users / usage modes
| Home office storage | Position against wall to store files, office supplies and decor on upper open shelf | |
|---|---|---|
| Living room display and storage | Place in living area to display decor on open shelf, store media and clutter behind doors | |
| Light commercial office use | Deploy in open office areas or break rooms for general supply and document storage | |
| Recommended clearance requirement | Leave 100mm clearance behind unit for air circulation and wall anchor installation |
EU Market Access Requirements* EN Standards
| EN 14749:2016 | Domestic and kitchen storage units and worktops – safety requirements and test methods, applicable to structural safety verification | |
|---|---|---|
| EN 12521:2015 | Furniture – strength, durability and safety for domestic seating, referenced for hardware cycle performance alignment | |
| EN 717-1:2004 | Wood-based panels – determination of formaldehyde release, applicable to panel material emission testing |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to finished cabinet dimensional and structural inspection | |
|---|---|---|
| GB 18584-2001 | Indoor decorating and refurbishing materials – limit of harmful substances for wooden furniture, applicable to formaldehyde emission verification | |
| GB/T 10357.5-2011 | Furniture mechanical performance test for storage units, applicable to shelf and structure load testing |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to finished cabinet dimensional and structural inspection; 2. GB 18584-2001: Indoor decorating and refurbishing materials – limit of harmful substances for wooden furniture, applicable to formaldehyde emission verification; 3. GB/T 10357.5-2011: Furniture mechanical performance test for storage units, applicable to shelf and structure load testing; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
