Two-Door Accent Storage Cabinet with Raised Legs and Display Top (model SC-2D-LW-825) is listed under Room Divider Planter Cabinet, with overall dimensions of 787 × 396 × 825 mm and main material of Particle‑board (PB). Load capacity: 68 kg. Certifications: light,wood,finish,double,hinged,doors,raised,leg,base,interior,shelving,flat,display,top. This page consolidates 6 groups of specifications and GB / EN standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions | 825 x 787 x 396 mm | |
|---|---|---|
| Floor clearance under base | 152 mm | |
| Top panel thickness | 32 mm | |
| Interior shelf thickness | 13 mm | |
| Leg cross-section | 38 x 38 mm | |
| Upper compartment height (below top) | 150 mm | |
| Middle shelf height from floor | 430 mm | |
| Door panel thickness | 18 mm | |
| Interior compartment vertical clearance (per shelf) | 292 mm | |
| Interior usable width | 730 mm | |
| Interior usable depth | 350 mm | |
| Carcass Panel Thickness | 25 mm | |
| Back Panel Thickness | 9 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Top surface static load capacity | 68 kg | |
|---|---|---|
| Total product net weight | 38 kg | |
| Door hinge open angle | 110 degrees | |
| Hinge cycle rating | 50000 open/close cycles | |
| Door catch pull force | 2 kg | |
| Surface water resistance | Wipe-clean, spill-resistant matte finish | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Carcass and panels | 15mm thick engineered wood with light washed wood grain veneer | |
|---|---|---|
| Support legs | Solid tapered wood legs with matching light finish | |
| Door hardware | Metal butt hinges with magnetic door catches | |
| Edge banding | 1mm thick matching PVC edge banding on all exposed panel edges | |
| Interior shelves | 13mm thick engineered wood shelves with position-adjustable shelf pins | |
| Back panel | 3mm thick hardboard back panel with recessed rabbet fitting |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Door operation | Double outward-swinging hinged doors with magnetic catch retention | |
|---|---|---|
| Shelf adjustability | Two interior shelves support repositioning via pin holes on side panels | |
| Top surface use | Flat elevated top surface for decorative display and light item placement | |
| Storage layout | One small upper fixed compartment plus two lower enclosed shelf bays |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Residential entryway use | Compact footprint for entry storage of bags, books and small accessories | |
|---|---|---|
| Living room accent storage | Serves as decorative side storage for media accessories, linens and display items |
EU Market Access Requirements* EN Standards
| EN 14749:2016 | Domestic and kitchen storage units and worktops - safety requirements and test methods | |
|---|---|---|
| EN 15185:2011 | Furniture - assessment of surface resistance to abrasion for wood furniture finishes | |
| EN 16121:2013 | Non-domestic storage furniture - safety, strength and durability requirements |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for finished cabinet quality verification | |
|---|---|---|
| GB/T 4893.1-2021 | Surface abrasion resistance test for furniture finishes, applicable for finish durability acceptance | |
| GB 18584-2001 | Indoor decorating and refurbishing materials - limit of harmful substances of wood based furniture |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for finished cabinet quality verification; 2. GB/T 4893.1-2021: Surface abrasion resistance test for furniture finishes, applicable for finish durability acceptance; 3. GB 18584-2001: Indoor decorating and refurbishing materials - limit of harmful substances of wood based furniture; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp