Two-Tone 3-Door Sliding Door Low Storage Credenza (model SDC-3DG-OAK-750H) is listed under Room Divider Planter Cabinet, with overall dimensions of 1650 × 520 × 750 mm and main material of Particle‑board (PB). Load capacity: 25 kg. Certifications: Modern,two-tone,design,handleless,sliding,door,freestanding,enclosed,storage,adjustable,floor,levelers. This page consolidates 6 groups of specifications and GB / EN / ANSI/BIFMA standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions | 1650 x 520 x 750 mm | |
|---|---|---|
| Top frame trim height | 80 mm | |
| Single sliding door panel width | 540 mm | |
| Sliding door panel height | 620 mm | |
| Floor clearance under base | 15 mm | |
| Left side panel thickness | 18 mm | |
| Carcass back panel thickness | 5 mm | |
| Adjustable shelf thickness | 18 mm | |
| Internal storage clear height | 610 mm | |
| Sliding door track width | 30 mm | |
| Internal shelf depth | 490 mm | |
| Leveler foot diameter | 20 mm | |
| Carcass Panel Thickness | 25 mm | |
| Back Panel Thickness | 9 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Per-shelf distributed static load | 25 kg | |
|---|---|---|
| Top surface distributed static load | 40 kg | |
| Unit net weight | 52 kg | |
| Sliding door cycle rating | 20000 open/close cycles | |
| Leveler foot adjustment range | 10 mm | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points | |
| Recommended Procurement Warranty | Carcass 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Carcass construction | 18mm E1 grade particleboard with melamine wood-grain finish | |
|---|---|---|
| Sliding door panels | 18mm MDF core with matte dark grey PU laminate finish | |
| Top and bottom frame trims | Particleboard with light oak-effect foil veneer | |
| Back panel | 5mm hardboard with dark grey matte backing | |
| Door hardware | Zinc-plated steel roller glides and plastic track channels | |
| Leveler feet | Injection-molded nylon base with steel threaded adjustment stem |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Door operation | 3 handleless horizontal sliding panels on roller tracks for full storage access | |
|---|---|---|
| Shelf configuration | 2 adjustable interior shelves with 50mm increment pin positions for variable storage heights | |
| Floor leveling | 4 corner-mounted adjustable feet to compensate for uneven floor surfaces | |
| Anti-tip provision | 2 wall anchor brackets included to secure unit to wall for tip-over prevention |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Office application | Suitable for open-plan office under-window storage or executive desk credenza for documents and supplies | |
|---|---|---|
| Residential application | Suitable for dining room sideboard, living room media storage or bedroom closet storage for folded items |
EU Market Access Requirements* EN Standards
| EN 14749:2016 | Safety and performance requirements for domestic and kitchen storage furniture | |
|---|---|---|
| EN 12521:2015 | Strength, durability and safety requirements for non-domestic storage furniture |
US and Canada office-furniture standards
| ANSI/BIFMA X5.9-2019 | Performance standard for storage units used in office environments, applicable for commercial installations |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for dimensional and structural verification | |
|---|---|---|
| GB 18580-2017 | Formaldehyde emission limits for engineered wood panels, required for indoor air quality compliance |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for dimensional and structural verification; 2. GB 18580-2017: Formaldehyde emission limits for engineered wood panels, required for indoor air quality compliance; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp