| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall occupied footprint | 1200 x 900 x 520 mm | |
|---|---|---|
| Main coffee table size | 900 mm diameter x 420 mm high | |
| Main top thickness | 12 mm | |
| Main drum base diameter | 900 mm | |
| Main drum body height | 360 mm | |
| Drum front panel width | 620 mm | |
| Side table top | 500 mm diameter x 8 mm thick | |
| Side tabletop height | 520 mm | |
| Floor runner size | 520 x 80 x 30 mm | |
| Support leg section | 80 x 30 mm rectangular metal profile | |
| Under-main-table ground clearance | 30 mm | |
| Main coffee table height | 420 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Main table distributed load | 50 kg | |
|---|---|---|
| Main top distributed load | 50 kg uniformly distributed over 900 mm diameter | |
| Side table distributed load | 20 kg uniformly distributed on glass top | |
| Concentrated load on main top | 20 kg on a 200 mm diameter contact area | |
| Concentrated load on side top | 10 kg on a 100 mm diameter contact area | |
| Stability overturning limit | 15 kg vertical load at 50 mm from side-table edge | |
| Drawer front operation | 20,000 open-close cycles with 5 kg stored load | |
| Floor leveling compensation | 0 to 10 mm adjustment at four concealed glides | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Main tabletop | 12 mm grey sintered-stone slab with polished stone-pattern face and eased round edge | |
|---|---|---|
| Slab backing layer | 15 mm moisture-resistant MDF or honeycomb support bonded under the stone | |
| Drum outer shell | 1.2 mm brushed grey stainless-steel sheet rolled into a continuous cylinder | |
| Drum internal frame | 20 x 40 mm powder-coated steel ring frames welded at top and bottom | |
| Front panel | 18 mm MDF core wrapped with brushed-grey metallic laminate and a black recessed pull line | |
| Storage interior | 15 mm grey melamine-faced particleboard compartment with PVC edge banding | |
| Side tabletop | 8 mm black tempered glass with flat polished perimeter and smooth reflective face | |
| Side support frame | 1.5 mm black powder-coated steel plate or tube formed into a continuous Z-frame | |
| Floor runner | 1.5 mm black powder-coated steel box runner welded to the Z-frame | |
| Bottom plinth | 1.0 mm brushed stainless ring with four non-marking PP glides | |
| Fasteners | M8 x 35 mm zinc-plated steel bolts and threaded steel mounting plates, 12 pieces total | |
| Surface coating | 40 micron polyester powder coating on black steel components |
Adjustment / rotation / tilt / mobility / storage features
| Two-level serving layout | 420 mm main surface and 520 mm side surface provide separate zones for trays and drinks | |
|---|---|---|
| Nested placement | Side-table runner slides beside the drum to reduce the display footprint to 1200 x 900 mm | |
| Split use | 500 mm side table can be positioned independently next to a sofa for cup and book access | |
| Concealed storage | 620 mm curved front panel opens to one internal compartment with a 300 mm usable face height | |
| Storage load limit | Interior compartment supports 10 kg distributed across its base | |
| Cantilever side support | Continuous Z-frame transfers side-top load through the 520 mm floor runner without a second visible leg | |
| Floor protection | Four 30 mm PP glides lift the drum 30 mm and allow sliding on hard flooring | |
| Leveling adjustment | Each glide adjusts 10 mm by hand to stabilize the table on uneven floors | |
| Rounded-edge safety | Both circular tops use eased edges with no exposed sharp corner within 360 degrees contact area | |
| Cable-free placement | No electrical mechanism or cable pass-through is included; surfaces support objects only | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
EU Market Access Requirements* EN Standards
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
