| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Large coffee table overall size | 800 mm diameter x 350 mm high | |
|---|---|---|
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| net weight | Large table 38 kg; small table 17 kg | |
|---|---|---|
| Large tabletop distributed load | 40 kg | |
| Small glass tabletop distributed load | 20 kg | |
| Concentrated object footprint | Minimum 60 mm diameter support pad recommended | |
| Recommended seating or user capacity | 2 to 4 users | |
| Top surface impact resistance | Level 2 residential lounge-duty target | |
| Floor loading | 95 kg/m2 under the large table | |
| Stability condition | Stable on level floors with maximum 2 mm variation over 1 m | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Large tabletop substrate | 25 mm engineered wood panel with high-gloss pale warm-gray painted finish | |
|---|---|---|
| Large drum body | Curved engineered-wood or bent plywood fascia painted in matching warm gray | |
| Large table edge | Rounded sealed painted edge with 50 mm visible fascia thickness | |
| Small tabletop | Smoked tempered glass with polished circular edge | |
| Small pedestal | Dark brown wood-grain veneer or melamine cylinder over structural core | |
| Small pedestal base | Black circular support plate, likely powder-coated steel or painted MDF | |
| Internal support structure | Central steel or hardwood load-transfer post with top and bottom mounting plates | |
| Surface coating | Two-tone high-gloss coating on pale and dark components | |
| Edge and joint treatment | Sealed painted edges and one fine vertical fascia joint | |
| Feet and floor protection | 20 mm hidden glide or felt-pad system recommended | |
| Decor items | Objects shown are styling props and are not included in the table specification | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up |
Adjustment / rotation / tilt / mobility / storage features
| Nested placement | Small table tucks behind or beside the 800 mm drum table while retaining a 200 mm top-height step | |
|---|---|---|
| Large low table use | 350 mm high circular top serves drinks, books, trays, and decor in a sofa-facing layout | |
| Independent repositioning | Both tables are freestanding and can be separated for flexible display or entertaining | |
| Central pedestal support | Small table uses one 220 mm cylindrical pedestal to maximize open floor area around it | |
| Low drum support | Large table uses a full cylindrical base without exposed legs, creating a soft child-friendly perimeter | |
| Surface cleaning | Gloss and glass surfaces can be wiped with a soft damp cloth; no abrasive pad should be used | |
| Floor protection | Felt or TPU glides should be installed under both bases before use on wood or polished tile | |
| Load limitation | Avoid standing, sitting, or placing hot cookware directly on either tabletop | |
| Cable management | No integrated power module, grommet, tray, or cable channel is present | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Total carton volume | 0.55 CBM | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Modern living room | Place the low 800 mm table in front of a sofa and use the 550 mm table as a side accent for drinks | |
|---|---|---|
| Apartment lounge | Use the nested pair in compact rooms where the smaller table can be pulled forward only when needed | |
| Hotel lobby seating | Specify around modular lounge seating for decorative objects, beverages, and reading materials | |
| Reception waiting area | Use both tables between two to four lounge chairs to create a layered contemporary guest zone | |
| Show home or model apartment | Pair with neutral upholstery and metallic accessories to emphasize the warm-gray and smoked-glass finish | |
| Light commercial cafe lounge | Suitable for low-traffic decorative seating areas with coasters and tray-based service |
EU Market Access Requirements* EN Standards
| Surface performance suggestion | EN 12720 resistance to cold liquids and EN 12721 resistance to wet heat | |
|---|---|---|
| Wood-panel emission suggestion | EN 13986 wood-based panels for formaldehyde class E1 | |
| Glass safety suggestion | EN 12150thermally toughened soda-lime silicate safety glass | |
| Stability and strength suggestion | EN 1730 static load and stability test method for tables | |
| Edge and corner safety suggestion | EN 1129sharp-edge assessment for household furniture |
US and Canada office-furniture standards
| Light-table vertical load suggestion | ANSI/BIFMA X5.5 vertical load test for occasional tables | |
|---|---|---|
| Table stability suggestion | ANSI/BIFMA X5.5 stability and tip-over procedures | |
| Surface durability suggestion | ANSI/BIFMA X5.5 wear, impact, and surface performance sections | |
| Floor protection suggestion | ANSI/BIFMA X5.9 glide and floor-protection principles for movable furniture |
Standards applicable to China-market projects
| Formaldehyde emission suggestion | GB/T 39600 artificial wood panels, E1 emission limit | |
|---|---|---|
| Furniture surface durability suggestion | GB/T 4893.4 cross-cut adhesion and GB/T 4893.8 wear resistance for painted surfaces | |
| Glass safety suggestion | GB 15763.2 tempered safety glass requirements for building and furnishing glass | |
| Furniture stability suggestion | GB/T 10357.7 table stability test method | |
| Mechanical safety suggestion | GB 28007 children's furniture sharp-edge and safety provisions when used in family areas |
This product must meet the following technical requirements: 1. Formaldehyde emission suggestion: GB/T 39600 artificial wood panels, E1 emission limit; 2. Furniture surface durability suggestion: GB/T 4893.4 cross-cut adhesion and GB/T 4893.8 wear resistance for painted surfaces; 3. Glass safety suggestion: GB 15763.2 tempered safety glass requirements for building and furnishing glass; 4. Furniture stability suggestion: GB/T 10357.7 table stability test method; 5. Mechanical safety suggestion: GB 28007 children's furniture sharp-edge and safety provisions when used in family areas; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
