| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Coffee table overall size | 1200 x 600 x 420 mm | |
|---|---|---|
| Side table overall height | 520 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Coffee table total net weight | 32 kg | |
|---|---|---|
| Coffee table distributed top load | 40 kg | |
| Lower shelf distributed load | 10 kg | |
| Side table distributed top load | 20 kg | |
| Recommended users | 2 to 4 people | |
| Top surface usable area | 0.66 m2 | |
| Tip-over safety recommendation | Anchor not required for freestanding low tables; keep objects below 5 kg within 100 mm of edges | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Coffee table top substrate | 25 mm thick wood-based composite panel with painted outer edge totaling 35 mm | |
|---|---|---|
| Coffee table finish | Matte warm off-white painted surface with sealed rounded edge | |
| Angled support panels | 18 mm painted wood-based composite panels in taupe brown | |
| Lower shelf | 18 mm taupe painted composite board forming an open horizontal storage shelf | |
| Side table top | 25 mm painted wood-based composite circular panel with a 20 mm raised tray rim | |
| Side table pedestal | Conical painted support in warm off-white, likely composite or metal with smooth coating | |
| Base protection | 4 felt or polymer glide pads across the two table bases, 2 mm thick | |
| Edge treatment | Sealed rounded painted edges with no exposed laminate seam visible | |
| Fasteners and joinery | Carbon-steel cam bolts, dowels and corner brackets with 8 mm diameter dowel pins | |
| Surface coating build | Two-coat matte polyurethane paint system at 0.18 mm dry film thickness | |
| Color combination | Warm off-white top and pedestal with taupe brown shelf structure and side-table top | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up |
Adjustment / rotation / tilt / mobility / storage features
| Open under-top display | Central open shelf provides 620 mm wide storage for books, media devices or decorative objects | |
|---|---|---|
| Rounded-edge safety | Rounded-rectangle coffee table uses 120 mm end radii to reduce sharp-corner impact in lounge areas | |
| Side table tray surface | 550 mm circular top has a 20 mm raised rim to restrain cups, books or a small lamp | |
| Nested or paired layout | Side table can stand independently or overlap the coffee-table end to reduce the combined footprint to 1750 mm | |
| Floor leveling | Four 2 mm screw-in or adhesive floor glides compensate for 5 mm floor unevenness | |
| Surface maintenance | Matte sealed surfaces support wiping with a damp cloth and neutral pH cleaner; no steam cleaning | |
| Object placement | Coffee table top accommodates trays, books and drinks across 0.66 m2 while the shelf keeps frequently used items below 160 mm clearance | |
| Freestanding installation | Both tables require no wall anchoring and are placed directly on level hard floors or low-pile carpet | |
| Load limitation | Shelf is specified for 10 kg distributed display loads and must not support standing or seating loads | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Living room center arrangement | Place the 420 mm coffee table in front of a sofa for drinks, books, trays and display objects | |
|---|---|---|
| Sofa-end beverage surface | Use the 520 mm pedestal table beside a sofa or lounge chair for a cup, lamp or remote control | |
| Small apartment pairing | Use both pieces in staggered layout where the side table overlaps the long table end to save circulation space | |
| Model home or showroom | Specify the two-tone matte set for neutral contemporary staging with beige, taupe or warm gray interiors | |
| Lounge waiting area | Suitable for low-density residential-style waiting corners requiring open display rather than locked storage | |
| Recommended clearance | Maintain 450 mm circulation clearance beyond the 1750 mm combined display footprint | |
| Surface use limit | Designed for objects, beverages and decor; neither table is intended as seating, step support or monitor stand |
EU Market Access Requirements* EN Standards
| Household table safety recommendation | EN 12521:2015 safety, strength and durability requirements for domestic tables | |
|---|---|---|
| Surface emission recommendation | EN 16516:2017 chamber method for formaldehyde release from wood-based products | |
| Edge and corner recommendation | EN 1129:1993 radius assessment for furniture edges where softened corners are required |
Standards applicable to China-market projects
| Formaldehyde emission recommendation | GB/T 39600E1 limits for artificial-board formaldehyde emission | |
|---|---|---|
| Furniture dimensional tolerance recommendation | GB/T 3324 general technical requirements for wooden furniture | |
| Surface durability recommendation | GB/T 4893.4cross-hatch adhesion test for painted furniture surfaces | |
| Mechanical safety recommendation | GB/T 10357.5furniture strength and durability test methods |
This product must meet the following technical requirements: 1. Formaldehyde emission recommendation: GB/T 39600E1 limits for artificial-board formaldehyde emission; 2. Furniture dimensional tolerance recommendation: GB/T 3324 general technical requirements for wooden furniture; 3. Surface durability recommendation: GB/T 4893.4cross-hatch adhesion test for painted furniture surfaces; 4. Mechanical safety recommendation: GB/T 10357.5furniture strength and durability test methods; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
