| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Set overall footprint when nested | 700 x 700 x 400 mm | |
|---|---|---|
| Large table overall dimensions | 700 x 700 x 360 mm | |
| Small table overall dimensions | 500 x 500 x 400 mm | |
| Large tabletop thickness | 25 mm | |
| Small tabletop thickness | 25 mm | |
| Large pedestal diameter | 300 mm | |
| Small pedestal diameter | 240 mm | |
| Large pedestal height | 335 mm | |
| Small pedestal height | 375 mm | |
| Corner radius | 65 mm | |
| Large table floor clearance | 335 mm | |
| Small table floor clearance | 375 mm | |
| Nesting overlap depth | 300 mm | |
| Horizontal separation between pedestal centers | 330 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat |
Net weight / load capacity / users / durability
| Large table distributed static load | 50 kg | |
|---|---|---|
| Small table distributed static load | 25 kg | |
| Set net weight | 17 kg | |
| Recommended serving objects per table | 3 | |
| Pedestal stability contact diameter | 300 mm | |
| Finish acceptance abrasion rating | 2000 cycles | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Large tabletop substrate | Engineered wood board with walnut wood-grain veneer or laminate | |
|---|---|---|
| Small tabletop substrate | Engineered wood board with blackened wood-grain finish | |
| Large pedestal | Walnut-toned wood-veneer or laminate wrapped panel cylinder | |
| Small pedestal | Black wood-grain wrapped panel cylinder | |
| Edge treatment | Rounded, continuous edge banding with matching finish | |
| Internal support block | Hidden central wood or MDF connector block joining top and pedestal | |
| Base contact face | Flat machined bottom ring with protective felt or glide pads | |
| Surface finish | Low-sheen wood-look protective finish | |
| Top core thickness | 25 mm engineered board | |
| Pedestal panel thickness | 18 mm | |
| Hardware | 4 concealed connector bolts or cam screws per pedestal | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up |
Adjustment / rotation / tilt / mobility / storage features
| Nesting operation | The 500 mm table slides manually beside or partially under the rear edge of the 700 mm table. | |
|---|---|---|
| Separate use | The two freestanding tables can be split into a coffee table and adjacent drink table. | |
| Height arrangement | The smaller table is 40 mm higher, keeping cups accessible behind the lower front table. | |
| Pedestal support | Each top is centered on one fixed cylinder, leaving the outer perimeter free of legs. | |
| Rounded-corner safety | 65 mm radiused corners reduce sharp impacts around lounge seating. | |
| Floor protection | Separate base glides allow repositioning while limiting direct abrasion to flooring. | |
| Assembly form | Pedestal-to-tabletop attachment uses concealed hardware; no moving mechanism is present. | |
| Nesting limit | Tables nest to a 300 mm overlap while maintaining a 40 mm height difference. | |
| Surface maintenance | Sealed wood-look surface supports dry or damp wiping; spill resistance requires finish data. | |
| Leveling adjustment | Fixed glides provide a 2 mm compensation allowance; threaded levelers are not visible. | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Living room center table | The 700 mm table serves a sofa grouping for drinks, books, and decorative objects. | |
|---|---|---|
| Compact lounge area | The nested pair saves floor space when only one serving surface is needed. | |
| Reception seating area | The walnut and black pair suits contemporary client lounges with low seating. | |
| Side-table extension | The raised 500 mm table can be pulled beside an armchair for tea or coffee. | |
| Hotel or short-stay suite | The rounded-corner set provides durable lounge service without storage protrusions. | |
| Modern residential apartment | The pedestal form supports open sight lines in smaller seating areas. | |
| Recommended companion seating | Pair with sofas or armchairs having 380 to 450 mm seat heights. | |
| Layout spacing | Maintain 350 to 450 mm between table edge and seating for comfortable access. |
EU Market Access Requirements* EN Standards
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
