| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Main table overall footprint | 1100 x 600 x 420 mm | |
|---|---|---|
| Side table overall footprint | 550 x 550 x 550 mm | |
| Set combined display footprint | 1300 x 800 x 550 mm | |
| Main top thickness | 25 mm | |
| Main top corner radius | 80 mm | |
| Main pedestal base footprint | 760 x 380 mm | |
| Floor clearance under main top | 330 mm | |
| Open storage cubby opening | 480 x 300 x 180 mm | |
| Side table tray rim height | 20 mm | |
| Side pedestal diameter | 280 mm | |
| Side pedestal floor contact diameter | 300 mm | |
| Side table underside clearance | 500 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Main table distributed top load | 50 kg | |
|---|---|---|
| Side table distributed top load | 50 kg | |
| Storage cubby load | 15 kg | |
| Set net weight | 32 kg | |
| Occupancy | 2 tables and 4 users | |
| Floor contact points | 4 contact zones | |
| Surface impact acceptance | 25 kg drop-ball test at 140 mm | |
| Finish abrasion acceptance | 3000 Taber CS-10 cycles | |
| Warranty period | 1 year | |
| Top Static Load Reference | 150 kg uniformly distributed |
Core acceptance fields · Panels / hardware / frame / upholstery
| Main tabletop | Walnut wood-grain veneer, laminate, or walnut-effect engineered wood with a smooth matte surface | |
|---|---|---|
| Side table tray top | Round walnut-finish wood-based panel with a raised continuous rim | |
| Main sculptural base | Matte black painted wood-composite or MDF support forming a low pedestal | |
| Side pedestal | Matte black cylindrical pedestal with a smooth painted finish | |
| Storage compartment interior | Black or dark-brown engineered-wood panels forming one open cubby | |
| Edge treatment | Rounded, softened edges on both wood tops | |
| Floor protection | Polymer or felt glide pads recommended at all base contact points | |
| Fasteners | Black powder-coated steel connector plates and M8 barrel bolts recommended | |
| Panel substrate target | E1-class MDF, particleboard, or plywood substrate | |
| Base coating target | 40 micron matte polyurethane or powder-coated paint film | |
| Board thickness | 18 mm cabinet panels and 25 mm tops | |
| Colorways | Walnut top with matte black base |
Adjustment / rotation / tilt / mobility / storage features
| Nesting layout | The higher round table sits beside the rectangular table and can be repositioned independently | |
|---|---|---|
| Open book storage | One side-facing cubby accepts books and magazines without doors or drawers | |
| Tray-style drink surface | The 20 mm raised rim helps contain cups, saucers, and small objects | |
| Central pedestal access | The round table uses one central column, leaving knee and foot access around its perimeter | |
| Floor leveling | Separate glide pads should be fitted to each base corner or column bottom for leveling on 5 mm uneven floors | |
| Assembly method | Top panels attach to the pedestal bases with threaded inserts, connector plates, and supplied hardware | |
| Surface cleaning | Matte wood-grain surfaces can be wiped with a dry or slightly damp cloth and dried immediately | |
| Stability function | Wide low bases lower the center of gravity and resist tipping during normal drink and book use | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Living room sofa grouping | Place the rectangular table in front of a two- to four-seat sofa for drinks, books, and decor. | |
|---|---|---|
| Lounge reception area | Use the set in apartment lounges, hotel lobbies, or showroom seating areas with mixed-height surfaces. | |
| Compact apartment layout | Separate the round pedestal table for an armchair while keeping the storage table near the sofa. | |
| Reading corner | The open cubby supports current magazines and books while the top remains clear for beverages. | |
| Modern residential interior | Walnut grain and matte black sculptural bases suit contemporary, Japandi, or mid-century-inspired rooms. | |
| Care environment recommendation | Use on level hard flooring or low-pile carpet with glide pads to prevent abrasion and rocking. |
EU Market Access Requirements* EN Standards
| EN 15372:2016 | Use for safety, strength, durability, and inspection requirements for non-domestic tables. | |
|---|---|---|
| EN 12521:2015 | Use for safety, strength, and durability requirements for domestic tables. | |
| EN 13722:2004 | Use for furniture surface assessment if bend loading is included in inspection. |
Standards applicable to China-market projects
| GB/T 3324-2024 | Use for general technical requirements, dimensions, and inspection of wooden furniture. | |
|---|---|---|
| GB/T 4893.1-2021 | Use for tabletop surface film resistance to cold liquids during procurement inspection. | |
| GB/T 4893.4-2013 | Use for adhesion testing of finished wood furniture surfaces. | |
| GB/T 4893.8-2013 | Use for wear-resistance verification of the tabletop finish. | |
| GB/T 10357.5-2023 | Use for furniture strength and durability testing appropriate to table products. | |
| GB 18580-2017 | Use for formaldehyde emission limits if engineered-wood panels are supplied. |
This product must meet the following technical requirements: 1. GB/T 3324-2024: Use for general technical requirements, dimensions, and inspection of wooden furniture.; 2. GB/T 4893.1-2021: Use for tabletop surface film resistance to cold liquids during procurement inspection.; 3. GB/T 4893.4-2013: Use for adhesion testing of finished wood furniture surfaces.; 4. GB/T 4893.8-2013: Use for wear-resistance verification of the tabletop finish.; 5. GB/T 10357.5-2023: Use for furniture strength and durability testing appropriate to table products.; 6. GB 18580-2017: Use for formaldehyde emission limits if engineered-wood panels are supplied.; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
