| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall cabinet dimensions | 2000 x 430 x 533 mm | |
|---|---|---|
| Top slab thickness | 18 mm | |
| Carcass panel thickness | 18 mm | |
| Back panel thickness | 9 mm | |
| Door panel size | 450 x 350 mm per visible bay | |
| Interior compartment height | 330 mm | |
| Interior shelf depth | 370 mm | |
| Interior shelf thickness | 15 mm | |
| Open base support height | 175 mm | |
| U-loop support width | 110 mm | |
| U-loop return depth | 300 mm | |
| Rounded end cap width | 70 mm | |
| Door divider band width | 45 mm | |
| Maximum TV base width supported | 2159 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
| Net weight | 47 kg | |
|---|---|---|
| Top distributed static load | 113 kg | |
| Shelf load per level | 20 kg | |
| Recommended television size | 85 in | |
| Recommended maximum television width | 2159 mm | |
| Storage bays | 4 separate front compartments | |
| Interior shelf count | 2 shelves | |
| Door hinge cycles | 50,000 open-close cycles | |
| Leveling adjustment | 10 mm foot-pad height compensation | |
| Shelf Distributed Load | 30 kg/shelf |
Core acceptance fields · Panels / hardware / frame / upholstery
| Top surface | Stone-look slab or sintered-stone panel with smooth low-sheen finish | |
|---|---|---|
| Cabinet body | Engineered wood with taupe painted or laminated outer surfaces | |
| Door fronts | Flat engineered-wood panels with seamless light taupe glossy finish | |
| End caps | Dark brown or bronze-toned rigid panels with rounded outer corners | |
| U-loop supports | Dark-finish metal rectangular-tube frame with floor-return runners | |
| Vertical support cladding | Dark composite or metal-clad panels wrapping cabinet support points | |
| Interior shelves | Matching engineered-wood shelf boards, likely adjustable with peg holes | |
| Back panel | Hardboard or engineered-wood thin back panel for dust separation | |
| Hinges | Concealed cup hinges with side adjustment and soft-close target | |
| Protective feet | Polymer or felt pads bonded under metal runners | |
| Seams | Flush factory-finished door reveals with 2 mm nominal reveal gaps | |
| Edge Band Thickness | 2 mm |
Adjustment / rotation / tilt / mobility / storage features
| Door operation | Four handleless doors open by push-touch or finger-reveal operation with concealed hinges | |
|---|---|---|
| Storage layout | Four horizontal front bays provide concealed storage with two internal shelves for media devices and accessories | |
| Cable management | Two 60 mm rear cable openings route power and HDMI leads from components to wall outlets | |
| Ventilation design | Rear open shelf area and 20 mm rear clearance provide passive airflow around AV receivers and consoles | |
| Leveling function | Pad or micro-foot adjusters correct floor variation while the two loop frames keep the long body stable | |
| Rounded end protection | Rounded outer corners reduce impact exposure on the cabinet ends | |
| Media display surface | Continuous flat top supports a television, soundbar, and decorative objects up to 2159 mm wide | |
| Service access | Doors swing outward to expose full-width compartments and allow component connection without moving the television | |
| Cable / Vent Opening Reference | 80 mm diameter; recommend 4rear cable/vent openings |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
Recommended spaces / users / usage modes
| Living-room media wall | Suitable below a wall-mounted or stand-mounted television up to 85 inches in a modern living room | |
|---|---|---|
| Contemporary apartment lounge | Fits minimalist interiors using taupe, greige, stone, and dark bronze palettes | |
| Hotel suite entertainment area | Provides durable concealed storage and a clean display surface for guest-room media equipment | |
| Showroom or model home display | Works as a styled statement console with decorative objects placed on the continuous top | |
| Open-plan living and dining area | Defines a media zone without a tall visual barrier, preserving sightlines across the room | |
| Recommended AV configuration | Pair with soundbar, streaming device, game console, and rear power outlet using the two cable openings |
EU Market Access Requirements* EN Standards
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
