| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall extended footprint | 900 x 900 x 450 mm | |
|---|---|---|
| Large tabletop diameter | 800 mm | |
| Small tabletop diameter | 600 mm | |
| Large table surface height | 360 mm | |
| Small table surface height | 450 mm | |
| Stone-look top thickness | 15 mm | |
| Fluted pedestal diameter | 760 mm | |
| Pedestal body height | 330 mm | |
| Flute rib width | 18 mm | |
| Flute groove depth | 8 mm | |
| Small support panel thickness | 50 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Lower table distributed static load | 50 kg | |
|---|---|---|
| Upper table distributed static load | 30 kg | |
| Concentrated load acceptance | 20 kg over a 100 x 100 mm area for 1 hour | |
| Top surface impact resistance | 1.0 kg steel ball dropped from 150 mm without through-crack | |
| Stability under eccentric load | 15 kg placed 100 mm inside the top edge without tipping | |
| Finish abrasion rating | 400 cycles with no wear-through under a 1 kg felt-abrasion load | |
| Floor-protection load bearing | Six polymer pads with 20 mm contact diameter each | |
| Flatness tolerance | 2 mm maximum gap under a 1000 mm straightedge | |
| Moisture content of wood-based substrate | 12 percent maximum | |
| Top Static Load Reference | 150 kg uniformly distributed |
Core acceptance fields · Panels / hardware / frame / upholstery
| Lower tabletop | 15 mm glossy white engineered-stone or sintered-stone-look slab with gray veining and eased round edge. | |
|---|---|---|
| Upper tabletop | 15 mm glossy white marble-look engineered slab bonded to a concealed support board and black underside frame. | |
| Lower pedestal core | Cylindrical 18 mm thick MDF or plywood drum forming the load-bearing circular base. | |
| External fluting | 12 mm painted MDF or wood-composite ribs applied around the drum to create 8 mm deep vertical grooves. | |
| Brown accent panel | 25 mm curved wood-composite panel with brown wood-grain veneer or laminate wrap on one pedestal side. | |
| Upper support leg | 50 mm thick curved black painted wood-composite slab connecting the floor to the upper top frame. | |
| Internal support frame | 30 x 30 x 1.2 mm square steel tube frame inside the upper support and top carrier. | |
| Top-to-base connectors | Eight M8 x 40 mm steel inserts with locking washers join each top to its support frame. | |
| Base bottom ring | 15 mm moisture-resistant MDF ring with six polymer glide pads for floor contact and leveling. | |
| Surface coating | Two-component polyurethane paint at 0.12 mm dry-film thickness on black and brown exposed components. | |
| Edge treatment | Rounded 2 mm radius edge sealing on both stone-look tops to reduce chipping. | |
| Fastener finish | Zinc-plated steel screws, cam bolts, and threaded inserts for corrosion-resistant indoor assembly. |
Adjustment / rotation / tilt / mobility / storage features
| Nested storage | the 680 mm upper table slides over the 800 mm lower table, reducing occupied width from 1200 mm to 900 mm. | |
|---|---|---|
| Offset serving layout | the upper top rests 90 mm higher than the lower top, creating separate 360 mm and 450 mm serving levels. | |
| 360-degree manual rotation | the upper table can be repositioned around the lower drum without tools, subject to a 50 mm minimum top clearance. | |
| Fixed-level support | both tops maintain their 360 mm and 450 mm heights; no gas lift, height adjustment, or powered mechanism is included. | |
| Display and serving | the combined 0.88 square meter surface area supports trays, magazines, drinks, and decorative objects in two independent zones. | |
| Floor protection | six non-marking polymer glides create a 12 mm raised shadow gap and prevent direct painted-base contact with flooring. | |
| Static arrangement | the pedestal and curved support have no casters, making the unit suited to fixed living-room placement rather than frequent rolling. | |
| Assembly fit | curved support locates on two M8 dowel pins and four cam bolts, with 2 mm maximum lateral alignment tolerance. | |
| Knockdown shipping option | tops, pedestal drum, support slab, and hardware separate into one flat-packed kit while preserving the visible nested form. | |
| Anti-wobble acceptance | glides include 5 mm thread adjustment to compensate for floor unevenness within a 3 mm level difference. | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Living-room center table in front of a 2200–3200 mm sofa | use both tiers for drinks, remote controls, books, and guest serving. | |
|---|---|---|
| Small apartment or studio | nest the 680 mm top over the 800 mm base to retain a 900 mm circular footprint when not entertaining. | |
| Hotel suite or serviced-apartment lounge | specify the high-gloss stone-look top for easy wipe-down after cups, trays, and room-service items. | |
| Reception waiting area | place the nested set between lounge chairs to provide two display levels without casters or protruding legs. | |
| Model-home staging | use the black fluted drum and brown curved accent to complement modern luxury, art deco, or contemporary interiors. | |
| Bedside or lounge-side alternate use | position the 450 mm upper tier beside a low armchair for a laptop cup, lamp, book, or phone. | |
| Event or showroom display | keep the set fixed in place and use the glossy circular tops for trays, floral arrangements, or catalogs. |
EU Market Access Requirements* EN Standards
Standards applicable to China-market projects
| GB/T 3324-2017 General technical requirements for wooden furniture | recommended for dimensional tolerances, materials, workmanship, and stability acceptance. | |
|---|---|---|
| GB/T 3325-2017 Test of materials and surfaces for wooden furniture | recommended for abrasion, impact, adhesion, moisture, and durability verification. | |
| GB/T 10357.5-2011 Furniture mechanical tests for tables | recommended static-load and stability acceptance protocol for household tables. | |
| GB 18584-2001 Indoor decorative materials – limit of formaldehyde emission for wood-based furniture | recommended emission limit for wood-composite components. | |
| GB/T 17657-2022 Test methods for wood-based panels | recommended substrate moisture, strength, and dimensional verification. |
This product must meet the following technical requirements: 1. GB/T 3324-2017 General technical requirements for wooden furniture: recommended for dimensional tolerances, materials, workmanship, and stability acceptance.; 2. GB/T 3325-2017 Test of materials and surfaces for wooden furniture: recommended for abrasion, impact, adhesion, moisture, and durability verification.; 3. GB/T 10357.5-2011 Furniture mechanical tests for tables: recommended static-load and stability acceptance protocol for household tables.; 4. GB 18584-2001 Indoor decorative materials – limit of formaldehyde emission for wood-based furniture: recommended emission limit for wood-composite components.; 5. GB/T 17657-2022 Test methods for wood-based panels: recommended substrate moisture, strength, and dimensional verification.; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
