| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Finished Top Thickness | 45 mm | |
|---|---|---|
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Coffee table net weight | 32 kg | |
|---|---|---|
| Coffee table distributed top load | 40 kg | |
| Side table distributed top load | 20 kg | |
| Lower shelf distributed load | 12 kg | |
| Top surface spot load | 10 kg over 100 x 100 mm | |
| Seating capacity served | 4 persons | |
| Color options represented | 2 finishes | |
| Suggested warranty | 24 months | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Coffee table top substrate | Engineered-wood panel with matte cream painted surface and eased rounded edge | |
|---|---|---|
| Coffee table support panels | Two angled mocha-brown painted engineered-wood panels connected to a central base | |
| Lower shelf | Flat dark-brown engineered-wood open shelf with a finished front edge | |
| Side table top | Mocha-brown circular engineered-wood tray top with raised perimeter lip | |
| Pedestal base | Cream painted tapered engineered-wood or MDF column with rounded bottom edge | |
| Panel nominal thickness | Main tops 50 mm and support panels 40 mm | |
| Surface coating | Matte low-sheen polyurethane or painted furniture finish | |
| Edge construction | Rounded and banded or fully painted edges with no exposed laminate line visible | |
| Base contact surface | Continuous floor-contact ring or protected underside pad on the pedestal | |
| Hardware and fasteners | Internal knock-down fittings with exterior screw heads concealed | |
| Floor protection | 4 polymer or felt pads recommended under each coffee-table support and 3 under the pedestal | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up |
Adjustment / rotation / tilt / mobility / storage features
| Nesting layout | Side table positions beside or partly alongside the larger table while keeping independent 360-degree access | |
|---|---|---|
| Open display shelf | Rectaneous through-shelf stores books and decorative objects between the angled support panels | |
| Tray-style side table edge | 18 mm raised circular lip reduces cup and tray sliding on the smaller accent table | |
| Fixed-height coffee surface | 420 mm fixed top height aligned with standard sofa arm and seat heights | |
| Fixed-height side surface | 550 mm fixed top height suited to cups, lamps, laptops, or bedside items | |
| Cleaning access | 350 mm under-table clearance allows robotic vacuum access below the outer coffee-table edge | |
| Independent use | Both tables separate into a central cocktail table and a movable end table without mechanical connectors | |
| Cable-free design | No power module, grommet, drawer, hinge, or lift mechanism is incorporated | |
| Floor leveling | Separate adhesive or screw-in pads should compensate for a 5 mm floor variation | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Living room center group | Place the 900 mm table between a two-seat sofa and lounge chairs for drinks, books, and display objects | |
|---|---|---|
| Small apartment layout | Use the two separate round tables when floor area is limited and sharp-cornered rectangular tables are unsuitable | |
| Lounge and reception area | Suitable for apartment lounges, boutique waiting areas, and residential show flats | |
| Decorative display | Top and open shelf support trays, books, candles, bowls, and small audio objects | |
| Hard-floor installation | Position on tile, wood, vinyl, or rug with protective pads under all contact points |
EU Market Access Requirements* EN Standards
| Household table safety recommendation | EN 12521:2015 stability, strength, and safety requirements for domestic tables | |
|---|---|---|
| Surface durability recommendation | EN 12720:2009 cold-liquid resistance test for the painted tabletop | |
| Dry-heat resistance recommendation | EN 12722:2009 dry-heat resistance test for warm cups and tableware | |
| Formaldehyde recommendation | EN 13986:2004 wood-based panel E1 requirement if engineered-wood panels are supplied |
Standards applicable to China-market projects
| Formaldehyde emission recommendation | GB/T 39600E1 limit applied to engineered-wood components | |
|---|---|---|
| Furniture test recommendation | GB/T 10357.5table strength and load tests applied to both tops | |
| Surface furniture recommendation | GB/T 4893.4adhesion test for painted film hardness and cross-cut performance | |
| Safety edge recommendation | GB 28007children's furniture edge and corner requirements used only as a safe-edge design reference |
This product must meet the following technical requirements: 1. Formaldehyde emission recommendation: GB/T 39600E1 limit applied to engineered-wood components; 2. Furniture test recommendation: GB/T 10357.5table strength and load tests applied to both tops; 3. Surface furniture recommendation: GB/T 4893.4adhesion test for painted film hardness and cross-cut performance; 4. Safety edge recommendation: GB 28007children's furniture edge and corner requirements used only as a safe-edge design reference; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
