| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1300 x 700 x 420 mm | |
|---|---|---|
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Net weight | 68 kg | |
|---|---|---|
| Tabletop distributed static load | 50 kg | |
| Lower shelf distributed static load | 30 kg | |
| Storage compartment capacity | 0.08 m3 | |
| Rotating mechanism axial load rating | 70 kg | |
| Recommended daily-use load | 25 kg | |
| Surface temperature use range | 0 to 60 degrees C | |
| Suggested seating accommodation | 4 persons | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Top surface | Light grey or off-white sintered-stone look slab with smooth low-sheen finish | |
|---|---|---|
| Top edge | Dark black or bronze-toned protective edge trim following the oval perimeter | |
| Storage body | Beige painted wood-composite panels with flush horizontal and vertical seams | |
| Front panel finish | Matte lacquered or laminate surface with three visible face divisions | |
| Lower shelf | Dark charcoal or bronze-brown oval platform with smooth painted surface | |
| Side support | Continuous loop support in dark painted wood composite or welded steel sheet | |
| Swivel bearing | Concealed circular metal turntable bearing between storage body and top support | |
| Internal panels | 18 mm thick E1-class wood-composite core panels as procurement specification | |
| Bottom protection | Four concealed anti-slip pads under the oval base | |
| Surface edge treatment | Rounded and sealed exposed edges with no sharp corner | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm |
Adjustment / rotation / tilt / mobility / storage features
| Rotating storage base | Central oval body rotates 360 degrees on a concealed bearing for access from either long side | |
|---|---|---|
| Storage access | Low-profile drum enclosure provides enclosed storage behind flush beige panels | |
| Open display zone | Right-side C-shaped opening leaves a visible display or temporary storage bay | |
| Stable low-center support | Wide oval lower platform and continuous loop frame resist tipping under eccentric top load | |
| Serving surface | Rounded 1300 mm top supports trays, books, drinks, and decorative objects across four seating positions | |
| Cantilevered top design | Large oval top overhangs the lower base while retaining a slim edge profile | |
| Floor-friendly placement | Continuous low base distributes load without sharp exposed legs | |
| Rotation damping specification | Swivel should operate with 2-hand effort and stop at any angle without self-drifting | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Modern living room | Place in front of a 3000 mm sofa to serve drinks, books, and remotes | |
|---|---|---|
| Hotel lounge or suite | Use as a refined center table where light surfaces and enclosed storage are required | |
| Reception waiting area | Position between lounge seating groups for magazines and beverage service | |
| Model-home staging | Use as a sculptural focal object in contemporary show flats | |
| Small executive relaxation zone | Suitable beside sofas in informal meeting spaces for four-person beverage access |
EU Market Access Requirements* EN Standards
| Furniture safety and stability | EN 12521 applies to safety, strength, and durability requirements for domestic tables | |
|---|---|---|
| Formaldehyde emission from panels | EN 13986 provides assessment requirements for wood-based panels used in construction | |
| Surface wear and finish checks | EN 12720 and EN 12721 cover cold-liquid and wet-heat resistance of furniture surfaces |
Standards applicable to China-market projects
| Dimensional and structural furniture standard | GB/T 3324 provides general technical requirements for wooden furniture dimensions, construction, and inspection | |
|---|---|---|
| Formaldehyde emission requirement | GB 18580 applies to wood-based panels and their indoor furniture products | |
| Furniture mechanical test for tables | GB/T 10357.5 provides table strength and durability test methods | |
| Furniture surface cold-liquid resistance | GB/T 4893.1 applies to resistance of finished furniture surfaces to cold liquids |
This product must meet the following technical requirements: 1. Dimensional and structural furniture standard: GB/T 3324 provides general technical requirements for wooden furniture dimensions, construction, and inspection; 2. Formaldehyde emission requirement: GB 18580 applies to wood-based panels and their indoor furniture products; 3. Furniture mechanical test for tables: GB/T 10357.5 provides table strength and durability test methods; 4. Furniture surface cold-liquid resistance: GB/T 4893.1 applies to resistance of finished furniture surfaces to cold liquids; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
