| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions (queen size) | 1500 x 2000 x 254 mm | |
|---|---|---|
| Mattress total thickness | 254 mm | |
| Quilted pillow-top layer thickness | 50 mm | |
| Perimeter border thickness | 20 mm | |
| Tuft/quilt stitch spacing | 120 mm | |
| Side label position height from bottom edge | 100 mm | |
| Edge support wire diameter | 4.1 mm | |
| Corners square radius | 30 mm | |
| Side Rail Thickness | 40 mm | |
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| Recommended static load capacity | 300 kg | |
|---|---|---|
| Net weight (queen size) | 35 kg | |
| Firmness level | Medium | |
| Coil count (queen size) | 720 | |
| Coil wire gauge | 13.75 | |
| Motion isolation rating | 3/5 | |
| Surface fabric abrasion resistance | 30000 cycles | |
| Limited warranty period | 10 years | |
| Bed Static Load Reference | 400 kg | |
| Per-slat Load Reference | 60 kg |
Core acceptance fields · Panels / hardware / frame / upholstery
| Top sleeping surface fabric | White knitted polyester damask fabric, quilted | |
|---|---|---|
| Side border fabric | Dark grey woven polyester upholstery fabric, reinforced | |
| Quilted comfort layer | 20mm high-resilience polyurethane foam pad | |
| Support core | 13.75 gauge steel verticoil innerspring unit | |
| Perimeter edge support | 4.1mm (6-gauge) steel border wire encased in high-density foam | |
| Bottom non-slip layer | Non-woven polypropylene anti-skid fabric | |
| Insulator pad between springs and foam | 25mm recycled fiber shoddy pad | |
| Quilt stitching thread | High-tenacity polyester thread, 3mm stitch pitch | |
| Slat Thickness | 15 mm bent plywood or solid timber | |
| Primary Connector Specification | Reference M8-M10 bolts with at least 2 fixing points per corner | |
| Reference Finish / Color Count | Recommended 6timber/upholstery options |
Adjustment / rotation / tilt / mobility / storage features
| Perimeter edge support | Reinforced steel border prevents perimeter sag when seated on mattress edge | |
|---|---|---|
| Quilted top cushioning | Multi-stitched tufted construction holds comfort layers in place to prevent shifting | |
| Air circulation | Open spring core design allows vertical airflow through mattress to reduce heat buildup | |
| Motion transfer reduction | Tied coil core reduces excessive bounce to limit partner disturbance during movement | |
| Surface compatibility | Flat uniform profile fits standard platform beds, slatted frames, and box springs | |
| Flip/rotation requirement | Two-sided design supports 180-degree rotation every 3 months for even wear | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Note | All logistics values are engineering s for preliminary quotation, not supplier-measured data | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Residential master bedrooms | Suitable for queen-size bed frames for adult double occupancy | |
|---|---|---|
| Guest bedrooms | Durable medium-firm support accommodates occasional guest use | |
| Hotel standard guest rooms | Commercial-grade coil construction meets regular use requirements for hospitality settings | |
| Rental property furnishing | Neutral white and dark grey finish matches all bed frame and decor styles | |
| Platform bed installation | 254mm thickness provides sufficient profile height for low-profile platform bases |
EU Market Access Requirements* EN Standards
| EN 1957:2012 | Test standard for domestic beds and mattresses, durability and strength requirements | |
|---|---|---|
| EN 16890:2017 | Air filtration performance for ventilation in upholstered furniture materials |
Standards applicable to China-market projects
| GB/T 26706-2011 | Applicable standard for flexible polyurethane foam used in furniture upholstery | |
|---|---|---|
| GB 18401-2010 | National safety technical code for textile products, Category B direct skin contact |
This product must meet the following technical requirements: 1. GB/T 26706-2011: Applicable standard for flexible polyurethane foam used in furniture upholstery; 2. GB 18401-2010: National safety technical code for textile products, Category B direct skin contact; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
