| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions (queen size reference) | 1800 x 2000 x 254 mm | |
|---|---|---|
| Quilted top comfort layer thickness | 50 mm | |
| Foam edge support width | 70 mm | |
| Side panel knit fabric thickness | 2 mm | |
| Corner label placement height | 120 mm from bottom edge | |
| Sleep surface usable width | 1660 mm | |
| Sleep surface usable length | 1860 mm | |
| Perimeter border wire gauge | 6 gauge | |
| Side Rail Thickness | 40 mm | |
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| Net product weight | 40 kg | |
|---|---|---|
| Static sleep load capacity | 360 kg | |
| Edge support static load | 110 kg | |
| Firmness rating | Medium plush | |
| Motion isolation rating | 80% motion reduction | |
| Cover fabric abrasion resistance | 50000 double rubs | |
| Foam density (support layers) | 40D | |
| Bed Static Load Reference | 400 kg | |
| Per-slat Load Reference | 60 kg | |
| Recommended Procurement Warranty | Frame 10 years; hardware 5 years; upholstery 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Top sleep surface | Hexagonal quilted knitted polyester fabric | |
|---|---|---|
| Side trim panel | Light blue vertical knit polyester fabric | |
| Quilt comfort layer | 20mm polyfiber + 30mm soft polyfoam | |
| Support core | 13.5 gauge tempered steel innerspring coils | |
| Perimeter edge | 40D high-density polyurethane foam encasement | |
| Internal lining | Non-woven polypropylene fabric | |
| Labeling tags | Woven polyester identification labels | |
| Border reinforcement | 6 gauge steel border wire | |
| Slat Thickness | 15 mm bent plywood or solid timber | |
| Primary Connector Specification | Reference M8-M10 bolts with at least 2 fixing points per corner | |
| Reference Finish / Color Count | Recommended 6timber/upholstery options |
Adjustment / rotation / tilt / mobility / storage features
| Sleep surface pressure distribution | Zoned coil support aligns spinal curvature for back, hip and shoulder relief | |
|---|---|---|
| Single-sided no-flip design | Padded top only, requires rotation 180 degrees every 6 months for even wear | |
| Perimeter edge support | Foam encasement allows full usable sleep surface to edges, no roll-off sensation | |
| Noise reduction construction | Individually wrapped coils separated by non-woven fabric eliminate metal squeaking | |
| Breathable air circulation | Vertical knit side panels and quilted top allow airflow to reduce heat buildup | |
| Compatible foundation types | Fits platform beds, box springs, slatted bed bases with slat spacing ≤70mm | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Residential primary bedroom | Fits standard queen size bed frames for adult couple daily sleep use | |
|---|---|---|
| Secondary guest bedroom | Medium plush feel suitable for occasional guest use with durable construction | |
| Showroom bedroom display | Visual design matches retail showroom presentation with decorative headboard pairing | |
| Hotel standard guest rooms | Durable edge support and medium firmness suitable for high-frequency hospitality use | |
| Youth/adult single bedroom | Can be used on smaller double bed frames for single adult long-term use |
EU Market Access Requirements* EN Standards
| EN 1957:2012 | Test method standard for mattress functional performance, durability and firmness rating |
|---|
Standards applicable to China-market projects
| GB/T 26706-2011 | Applicable standard for domestic furniture: spring soft mattresses for residential use | |
|---|---|---|
| GB 18401-2010 | National textile safety standard for mattress cover fabrics, Class B direct skin contact |
This product must meet the following technical requirements: 1. GB/T 26706-2011: Applicable standard for domestic furniture: spring soft mattresses for residential use; 2. GB 18401-2010: National textile safety standard for mattress cover fabrics, Class B direct skin contact; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
