| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall desktop dimensions | 1600 x 700 x 25 mm | |
|---|---|---|
| Maximum desktop height (standing position) | 1210 mm | |
| Minimum desktop height (seated position) | 720 mm | |
| Total lifting height stroke | 490 mm | |
| Horizontal T-base foot length per leg | 680 mm | |
| Telescoping leg tube cross-section (outer tube) | 60 x 60 mm | |
| Telescoping leg tube cross-section (inner tube) | 50 x 50 mm | |
| Seated under-desk knee clearance height at minimum position | 695 mm | |
| Adjustable leveling glide height adjustment range | 10 mm | |
| Control keypad mounted under right front edge dimensions | 150 x 40 x 20 mm | |
| Frame width adjustment compatibility range | 1800 mm | |
| Under-desk crossbar clearance above floor at minimum height | 100 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Total product net weight | 42 kg | |
|---|---|---|
| Dynamic lifting load capacity | 100 kg | |
| Lifting speed under full rated load | 38 mm/s | |
| Operating noise level during height adjustment | 45 dB | |
| Motor duty cycle (continuous operation / cool down) | 5 min on / 18 min off | |
| Recommended seated user weight capacity | 150 kg | |
| Frame structural warranty period | 10 years | |
| Electronics and motor warranty period | 5 years | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Tabletop substrate | 25mm thick E1 grade particle board, low formaldehyde emission | |
|---|---|---|
| Tabletop surface finish | White melamine laminate, scratch resistant, matte texture | |
| Lifting legs and support frame | 2mm thick SPCC cold-rolled steel, matte grey powder coating | |
| T-base horizontal feet | 1.8mm thick rectangular steel tube, matte grey powder coating, welded joint to vertical legs | |
| Leveling glides | Non-marking rubber tipped polypropylene glides, threaded steel adjustment stem | |
| Control keypad housing | High impact ABS plastic, matte black finish, membrane button panel |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Height adjustment mechanism | Dual motor 2-stage telescoping leg drive, one motor per leg for even weight distribution | |
|---|---|---|
| Control panel functionality | Digital keypad with 4 programmable memory height presets, real-time height display, up/down adjustment | |
| Anti-collision protection | Built-in current sensing anti-pinch function that stops and reverses movement on obstruction | |
| Leveling adjustment | Threaded glides at each foot end, adjustable by hand to compensate for uneven floor surfaces up to 10mm |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Home office workspaces | Suitable for remote work setups requiring seamless sit-stand position transitions throughout the workday | |
|---|---|---|
| Open plan office workstations | Suitable for corporate open office environments with uniform ergonomic height adjustment for all users |
EU Market Access Requirements* EN Standards
| EN 527-1:2011 | Applicable European standard for office work tables, dimensional and safety requirements | |
|---|---|---|
| EN 527-2:2016 | Applicable European standard for office work tables, mechanical safety and stability requirements | |
| EN 1335-1:2020 | Referenced standard for office chair-seated desk compatibility and clearance dimensions |
US and Canada office-furniture standards
| ANSI/BIFMA X5.5-2021 | Applicable North American standard for desk products, including strength, durability and stability testing | |
|---|---|---|
| ANSI/BIFMA G1-2013 | Applicable ergonomic guideline standard for adjustable height work surface dimensional requirements |
Standards applicable to China-market projects
| GB/T 3326-2016 | Applicable standard for office desk dimensional, structural and stability requirements for furniture testing | |
|---|---|---|
| GB/T 3324-2017 | Applicable general technical requirement standard for wooden furniture used in desk tabletop | |
| GB 18580-2017 | Applicable formaldehyde emission limit standard for wood-based panel tabletop materials |
This product must meet the following technical requirements: 1. GB/T 3326-2016: Applicable standard for office desk dimensional, structural and stability requirements for furniture testing; 2. GB/T 3324-2017: Applicable general technical requirement standard for wooden furniture used in desk tabletop; 3. GB 18580-2017: Applicable formaldehyde emission limit standard for wood-based panel tabletop materials; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp
