| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1450 x 450 x 860 mm | |
|---|---|---|
| Tapered leg height | 200 mm | |
| Small top drawer internal dimensions | 415 x 320 x 130 mm | |
| Large lower drawer internal dimensions | 660 x 320 x 130 mm | |
| Top surface thickness | 25 mm | |
| Case side panel thickness | 18 mm | |
| Drawer front panel thickness | 15 mm | |
| Floor clearance under base | 160 mm | |
| Small top drawer external width | 435 mm | |
| Large lower drawer external width | 685 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Per-drawer static load capacity | 12 kg | |
|---|---|---|
| Net weight | 48 kg | |
| Drawer slide cycle rating | 50000 open/close cycles | |
| Surface scratch resistance rating | 3H pencil hardness | |
| Anti-tip anchor load rating | 50 kg | |
| Available color count | 2 | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Top panel | Solid edge-glued natural hardwood panel, matte clear UV-cured finish | |
|---|---|---|
| Drawer fronts | Solid hardwood flush panels, no external handles, push-to-open contact points | |
| Case side panels | Solid hardwood framed panels, vertical grain match | |
| Legs | Solid tapered hardwood legs, integrated joinery to case base | |
| Drawer sides/backs | 12mm thick solid hardwood dovetail joinery | |
| Drawer bottoms | 5mm thick plywood insert, dadoed into drawer sides | |
| Finish | Low-VOC matte clear sealer, open-grain natural appearance | |
| Drawer slides | Undermount soft-close metal slides, push-to-open release mechanism | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Drawer opening mechanism | Push-to-open release, 15mm activation travel, no external pulls | |
|---|---|---|
| Drawer closing action | Soft-close damping, 50mm final close travel, no slam operation | |
| Drawer full extension | 320mm travel, full access to internal drawer compartment | |
| Storage layout | 3 small equal-width top drawers, 2 equal large drawers in middle and bottom rows | |
| Anti-tip safety | Included wall anchoring hardware to secure unit to wall studs | |
| Assembly requirement | Legs attach to pre-installed base mounts, no case assembly needed | |
| Surface use suitability | Flat level top supports decorative items, folded clothing or small personal items | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Carton dimensions | 1500 x 500 x 900 mm | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Residential bedroom application | Positioned against wall as clothing storage, adjacent to bed for folded garment access | |
|---|---|---|
| Entryway storage application | Used as entry console for outwear, accessories and daily carry items | |
| Walk-in closet application | Integrated into closet system for organized folded clothing storage | |
| Scandinavian interior compatibility | Light natural wood finish fits Nordic, Japandi and minimal modern design schemes | |
| Small space suitability | 450mm narrow depth minimizes floor space occupation while providing 7 storage compartments | |
| Wall anchor requirement | Must be secured to wall if used in homes with children under 6 years |
EU Market Access Requirements* EN Standards
| EN 14749:2016 | Applicable safety and strength requirements for domestic storage furniture | |
|---|---|---|
| EN 717-1:2004 | Applicable formaldehyde emission test for wood-based panels | |
| EN 15185:2011 | Applicable surface abrasion resistance test for furniture finishes |
Standards applicable to China-market projects
| GB/T 3324-2017 | Applicable general technical requirements for wooden furniture | |
|---|---|---|
| GB 18584-2001 | Applicable limit of harmful substances for wooden furniture | |
| GB/T 4893.8-2013 | Applicable surface wear resistance test for furniture finishes |
This product must meet the following technical requirements: 1. GB/T 3324-2017: Applicable general technical requirements for wooden furniture; 2. GB 18584-2001: Applicable limit of harmful substances for wooden furniture; 3. GB/T 4893.8-2013: Applicable surface wear resistance test for furniture finishes; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
