| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1250 x 400 x 780 mm | |
|---|---|---|
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Top surface maximum static load | 70 kg | |
|---|---|---|
| Per-drawer maximum static load | 15 kg | |
| Total unit maximum static load | 100 kg | |
| Unit net weight | 48 kg | |
| Drawer slide cycle rating | 50000 open/close cycles | |
| Finish abrasion resistance | Class 2 (2000 cycles) | |
| Wall anchor anti-tip load rating | 50 kg | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Main cabinet frame/top | Solid North American oak, 18mm panel thickness, butcher block joint construction | |
|---|---|---|
| Drawer fronts | Solid North American oak, mitered framed edge, matching grain alignment | |
| Tapered support legs | Solid North American oak, tapered profile, fixed mortise and tenon joinery | |
| Drawer boxes | Solid poplar interior, dovetail joinery at corners | |
| Drawer slides | Cold-rolled steel 3/4 extension ball-bearing glides with safety stop | |
| Surface finish | Clear matte nitrocellulose lacquer, 0.15mm coating thickness | |
| Back panel | 4mm thick oak veneered plywood, stapled fixed installation | |
| Hardware fasteners | Zinc-plated steel confirmat screws and wood dowels | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Drawer operation | 6 independently operable equal-size drawers, pull-out open with soft-close damping | |
|---|---|---|
| Drawer extension | 3/4 extension travel, full access to drawer interior without full removal | |
| Anti-tip safety | Included wall anchor kit secures unit to wall to prevent forward tipping | |
| Top surface use | Flat level top supports display items, folded clothing, or small decor pieces | |
| Assembly requirement | Knock-down assembly, legs and handles attach with included hardware | |
| Floor protection | Felt pads pre-installed on leg bases to prevent hard floor scratching | |
| Drawer alignment | Pre-drilled assembly holes ensure consistent 2mm gap between adjacent drawer fronts | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Bedroom placement | Positioned at bed end or along bedroom wall for clothing and linen storage | |
|---|---|---|
| Living room storage | Used as low storage console for media accessories and household items | |
| Entryway organization | Placed in entry foyers for outerwear accessories, keys, and entry storage | |
| Matching furniture set | Pairs with matching solid oak bed frames, nightstands, and wardrobes | |
| Hard floor compatibility | Suitable for wood, tile, and laminate floors with installed leg felt pads | |
| User group | Designed for residential homeowners seeking durable natural wood storage furniture |
EU Market Access Requirements* EN Standards
| EN 14749:2016 | Safety and performance requirements for domestic storage furniture and kitchen worktops | |
|---|---|---|
| EN 71-3:2019 | Migration of certain elements safety standard for furniture surface finishes |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applies to dimensional and structural tolerances | |
|---|---|---|
| GB 18584-2001 | Indoor decorating and refurbishing materials limit of harmful substances for wooden furniture | |
| GB/T 4893.8-2013 | Surface wear resistance test method for furniture coatings |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applies to dimensional and structural tolerances; 2. GB 18584-2001: Indoor decorating and refurbishing materials limit of harmful substances for wooden furniture; 3. GB/T 4893.8-2013: Surface wear resistance test method for furniture coatings; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
