| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1300 x 700 x 450 mm | |
|---|---|---|
| Tabletop thickness | 12 mm | |
| Frame side panel thickness | 18 mm | |
| Drawer internal dimensions (per drawer) | 580 x 310 x 120 mm | |
| Leg height (floor to frame base) | 120 mm | |
| Leg tube section diameter | 30 mm | |
| Undertable floor clearance | 120 mm | |
| Drawer front panel dimensions (per drawer) | 620 x 180 mm | |
| Top overhang (front/side) | 20 mm | |
| Corner radius of tabletop | 15 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Tabletop static distributed load capacity | 60 kg | |
|---|---|---|
| Sintered stone heat resistance | 200 °C | |
| Sintered stone surface Mohs hardness | 9 | |
| Drawer slide static load per drawer | 10 kg | |
| Product net weight | 45 kg | |
| Recommended number of users | 4 | |
| Surface water absorption rate | 0.03% | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop | 12mm glossy white sintered stone with polished finish | |
|---|---|---|
| Outer frame carcass | 18mm charcoal gray engineered wood with matte paint finish | |
| Drawer front panels | 15mm light gray matte engineered wood, two-tone contrast | |
| Support legs | Powder-coated gunmetal carbon steel, angled curved profile | |
| Drawer slide hardware | Cold-rolled steel ball-bearing soft-close slides | |
| Leveling feet | Nylon-tipped adjustable foot inserts on each leg | |
| Drawer internal lining | Melamine-faced engineered wood interior | |
| Frame corner joints | Reinforced metal dowel and cam-lock connectors | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Front storage | Two equal-width soft-close drawers with full-extension slides | |
|---|---|---|
| Leveling adjustment | 10mm height adjustment via nylon feet to compensate for uneven floors | |
| Surface function | Heat, stain and scratch resistant glossy top for daily drink and decor placement | |
| Design coordination | Matching design compatible with coordinated TV console and side table sets | |
| Leg design | Four splayed angled metal legs for stable weight distribution and reduced tipping risk | |
| Assembly | Knock-down leg attachment to pre-assembled drawer frame for simple on-site installation | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Primary residential use | Placement in front of standard 3-seat or L-shaped living room sofas | |
|---|---|---|
| Complementary set use | Pair with matching low TV console for coordinated modern living room sets | |
| Commercial use | Lobby seating areas in boutique offices, apartments or hotel lounges | |
| Storage use case | Concealed storage for remote controls, coasters, magazines and small living room accessories | |
| Style compatibility | Fits modern minimalist, Italian contemporary and light luxury interior design schemes |
EU Market Access Requirements* EN Standards
| Surface durability | EN 14688:2015 | |
|---|---|---|
| Furniture hardware performance | EN 15338:2007 | |
| Furniture stability | EN 1730:2000 |
Standards applicable to China-market projects
| Sintered stone tabletop | GB/T 3810.3 | |
|---|---|---|
| Wood-based frame panels | GB 18580 | |
| Furniture structural stability | GB/T 10357.1 |
This product must meet the following technical requirements: 1. Sintered stone tabletop: GB/T 3810.3; 2. Wood-based frame panels: GB 18580; 3. Furniture structural stability: GB/T 10357.1; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
