| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| TV console overall dimensions | 1803 x 414 x 457 mm | |
|---|---|---|
| Large coffee table overall dimensions | 1016 x 1016 x 457 mm | |
| Side nesting table overall dimensions | 508 x 508 x 610 mm | |
| TV console top thickness | 25 mm | |
| TV console glass door compartment dimensions | 480 x 380 x 300 mm | |
| TV console single drawer dimensions | 320 x 380 x 140 mm | |
| Large coffee table top thickness | 18 mm | |
| Large coffee table lower storage compartment height | 180 mm | |
| TV console base clearance | 20 mm | |
| TV console cable management cutout diameter | 60 mm | |
| TV console media shelf thickness | 15 mm | |
| Side table top thickness | 15 mm | |
| Carcass Panel Thickness | 25 mm | |
| Back Panel Thickness | 9 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
| TV console top static load capacity | 159 kg | |
|---|---|---|
| Set total net weight | 112 kg | |
| Maximum supported TV size | 80 in | |
| Surface scratch resistance rating | 2000 cycles | |
| Hinge and drawer slide cycle rating | 50000 cycles | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points | |
| Recommended Procurement Warranty | Carcass 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| TV console carcass | 18mm thick E1 grade engineered wood with high-gloss white paint finish | |
|---|---|---|
| TV console top surface | 25mm thick engineered faux marble slab with polished finish | |
| TV console metal components | 1.2mm thick brushed gold stainless steel plinth base, trim, and handles | |
| TV console media bay doors | 5mm thick clear tempered glass with gold metal framing | |
| TV console drawer fronts | 15mm thick engineered wood with vertical fluted texturing and white finish | |
| Large coffee table top | 18mm thick white faux marble engineered slab with gold metal trim edge | |
| Large coffee table base | 1.5mm thick brushed gold stainless steel circular disc pedestal | |
| Large coffee table lower body | 15mm thick engineered wood with high-gloss white finish enclosing storage | |
| Side table base | 1.2mm thick brushed gold stainless steel twisted angular support | |
| Floor protection components | 5mm thick non-slip felt pads on all metal base contact points | |
| Edge Band Thickness | 2 mm | |
| Primary Connector Specification | Reference M6-M8 cam/bolt fittings with at least 2 fixing points at major joints |
Adjustment / rotation / tilt / mobility / storage features
| TV console drawer operation | Four fluted-front drawers with gold knobs, pull-open with soft-close glides | |
|---|---|---|
| TV console media bay access | Two central clear glass doors with gold frames, opening to fixed interior shelves | |
| TV console cable management | Rear cutouts behind each media bay for routing AV power and signal cables | |
| Large coffee table storage | Enclosed lower compartment accessed via top lift panel for hidden living room item storage | |
| Nesting table functionality | Smaller side table slides fully under the large coffee table for space-saving storage when not in use | |
| Surface maintenance | High-gloss and faux marble surfaces are water-resistant and wipe-clean with standard household cleaners | |
| Edge safety design | Rounded curved end corners on TV console to eliminate sharp impact points in high-traffic areas | |
| Floor protection | Felt glides on all base feet prevent scratching hard flooring and rug snags | |
| Cable / Vent Opening Reference | 80 mm diameter; recommend 4rear cable/vent openings |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
Recommended spaces / users / usage modes
| Residential living room primary seating area | Positioned against a main wall for TVs up to 80 inches, with coffee table set centered on area rug in front of sofas | |
|---|---|---|
| Modern light luxury / glam interior design schemes | White and gold color palette with fluted and marble details matches contemporary upscale decor aesthetics | |
| Small to medium sized open-plan living spaces | Nesting table design saves floor space when extra surface area is not required | |
| Apartment and condo residential installations | Low-profile console and compact round tables suit standard urban living room dimensions | |
| Matching furniture configuration for media and display use | Console supports TVs and decorative objects, while coffee tables provide surface for drinks, books and decorative items | |
| Low-maintenance household use | Wipe-clean glossy and stone-look surfaces suit regular residential use without specialized care |
EU Market Access Requirements* EN Standards
| EN 14749:2016 | Domestic and kitchen storage units and worktops, safety requirements applicable to the TV console | |
|---|---|---|
| EN 12521:2015 | Domestic furniture strength, durability and safety for tables, applicable to the coffee table set | |
| EN 1022:2018 | Domestic furniture seating and table stability test methods, applicable for anti-wobble verification |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for dimensional and structural tolerance verification | |
|---|---|---|
| GB 18584-2001 | Indoor decoration material limit of harmful substances for wood furniture, applicable for formaldehyde emission testing | |
| GB/T 4897.3-2003 | Particleboard for furniture use, applicable for engineered wood carcass material verification |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for dimensional and structural tolerance verification; 2. GB 18584-2001: Indoor decoration material limit of harmful substances for wood furniture, applicable for formaldehyde emission testing; 3. GB/T 4897.3-2003: Particleboard for furniture use, applicable for engineered wood carcass material verification; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
