| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 2010 x 480 x 560 mm | |
|---|---|---|
| Leg height | 110 mm | |
| Central open cubby compartment size | 600 x 400 x 180 mm per cubby | |
| Drawer internal dimensions | 630 x 380 x 130 mm per drawer | |
| Top panel thickness | 30 mm | |
| Carcass side panel thickness | 18 mm | |
| Back panel thickness | 9 mm | |
| Shelf thickness for open cubbies | 18 mm | |
| Floor clearance under base | 110 mm | |
| Rear cable cutout diameter | 60 mm | |
| Carcass Panel Thickness | 25 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
| Top surface static load capacity | 136 kg | |
|---|---|---|
| Recommended maximum TV size | 85 inch | |
| Drawer slide cycle rating | 50000 open/close cycles | |
| Net weight | 65 kg | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points | |
| Recommended Procurement Warranty | Carcass 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Top panel | Solid rubberwood with matte clear water-based finish | |
|---|---|---|
| Drawer fronts and carcass panels | Solid rubberwood, flush handleless construction | |
| Legs | Solid rubberwood, angled tapered design | |
| Open cubby shelves | Solid rubberwood, fixed position | |
| Drawer slides | Soft-close full-extension ball bearing steel slides | |
| Back panel | Plywood with ventilated cutouts | |
| Finish coating | Low-VOC matte water-based lacquer | |
| Edge Band Thickness | 2 mm | |
| Primary Connector Specification | Reference M6-M8 cam/bolt fittings with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Drawer operation | Push-to-open soft-close mechanism, no external handles | |
|---|---|---|
| Cable management | Three rear 60mm cutouts aligned to open cubbies | |
| Central storage layout | Two stacked open cubbies for AV equipment access | |
| Side storage layout | Four stacked drawers (two left, two right) for concealed storage | |
| Ventilation | Open cubby rear panels include ventilation slots | |
| Assembly requirement | Leg attachment only, carcass pre-assembled | |
| Cable / Vent Opening Reference | 80 mm diameter; recommend 4rear cable/vent openings |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
Recommended spaces / users / usage modes
| Primary use space | Residential living room media wall, positioned below wall-mounted or standing TV | |
|---|---|---|
| Matching furniture set | Pairs with matching tall glass-front side display cabinets for coordinated media wall | |
| Secondary use case | Low profile sideboard for open-plan living/dining areas, storing tableware and linens | |
| Target user | Households preferring Scandinavian/Nordic minimalist natural wood interiors | |
| Recommended placement | Against flat wall with 100mm clearance behind for cable routing and ventilation |
EU Market Access Requirements* EN Standards
| EN 14749:2016 | Domestic and kitchen storage units and worktops - safety requirements and test methods | |
|---|---|---|
| EN 13722:2004 | Furniture - strength and durability of storage furniture for non-domestic use |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for structural integrityAcceptance | |
|---|---|---|
| GB 18584-2001 | Indoor decorating and refurbishing materials - limit of harmful substances of wood based furniture | |
| GB/T 4893.8-2013 | Test method for surface abrasion resistance of furniture finishes |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for structural integrityAcceptance; 2. GB 18584-2001: Indoor decorating and refurbishing materials - limit of harmful substances of wood based furniture; 3. GB/T 4893.8-2013: Test method for surface abrasion resistance of furniture finishes; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
