| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1800 x 400 x 430 mm | |
|---|---|---|
| Floor clearance under lower shelf | 120 mm | |
| Lower full-width open shelf height | 180 mm | |
| Central drawer unit internal width | 800 mm | |
| Single drawer internal dimensions | 380 x 360 x 150 mm | |
| Left/right open upper end bay width | 420 mm | |
| Top panel thickness | 25 mm | |
| Lower shelf panel thickness | 18 mm | |
| Vertical slat support diameter | 30 mm | |
| Tapered leg top cross-section | 50 x 50 mm | |
| Back panel cable cutout diameter | 60 mm | |
| Carcass Panel Thickness | 25 mm | |
| Back Panel Thickness | 9 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
| Top surface static load capacity | 80 kg | |
|---|---|---|
| Maximum compatible TV size | 75 inch | |
| Unit net weight | 60 kg | |
| Drawer slide cycle rating | 50000 open/close cycles | |
| Surface scratch resistance rating | 2000 revolutions | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points | |
| Recommended Procurement Warranty | Carcass 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Support legs | Solid rubberwood, tapered angled profile, natural matte finish | |
|---|---|---|
| Vertical end slats | Solid rubberwood, rounded profile, matching natural finish | |
| Main top panel | 18mm thick high-density fiberboard core, oak wood veneer, matte natural oil finish | |
| Drawer fronts | 18mm oak-veneered engineered wood, integrated recessed pull handles, matching veneer | |
| Lower full-width shelf | 15mm thick engineered wood, oak veneer top surface, solid wood edge banding | |
| Internal drawer construction | 12mm thick melamine-lined engineered wood drawer boxes, smooth interior finish | |
| Back panel | 3mm thick hardboard, pre-cut cable management openings, matte brown finish | |
| Drawer slides | Cold-rolled steel, 3/4 extension, soft-close damping mechanism | |
| Edge Band Thickness | 2 mm | |
| Primary Connector Specification | Reference M6-M8 cam/bolt fittings with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Central closed storage | Two equal-size handleless drawers with recessed pulls, for concealed media accessory storage | |
|---|---|---|
| End open display bays | Two raised open shelves at left and right ends, for set-top boxes and decorative items | |
| Lower full-width shelf | Continuous open shelf spanning entire unit length, for books, media equipment and display | |
| Cable management | Dual 60mm cutouts in rear back panel behind open bays, to route device power and AV cables | |
| Floor level adjustment | Non-adjustable solid wood tapered legs, provides stable elevation on even hard floors | |
| Drawer operation | Soft-close self-latching slides, pulls open via integrated horizontal recess, no protruding hardware | |
| Surface maintenance | Matte oiled veneer surface, wipe-clean with dry or slightly damp soft cloth, no harsh chemicals | |
| Cable / Vent Opening Reference | 80 mm diameter; recommend 4rear cable/vent openings |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
Recommended spaces / users / usage modes
| Living room primary media setup | Positioned against wall under wall-mounted or stand-mounted televisions up to 75 inches | |
|---|---|---|
| Apartment small-space layout | Low-profile 430mm height suits compact urban apartments without blocking sightlines | |
| Hotel guest room media storage | Scandinavian aesthetic matches mid-range hotel furnishing schemes, sufficient guest storage | |
| Matching living room set configuration | Pairs with matching Nordic-style oak coffee tables and side cabinets for coordinated decor |
EU Market Access Requirements* EN Standards
| EN 312:2010 | Particleboard performance requirements, applicable to engineered wood panel structural strength | |
|---|---|---|
| EN 13722:2004 | Furniture strength and durability requirements for storage units, applies to shelf and drawer loads | |
| EN 717-1:2004 | Formaldehyde emission determination for wood panels, sets E1 class emission limits |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to structural safety and finish quality | |
|---|---|---|
| GB 18584-2001 | Limit of harmful substances in wood furniture, controls formaldehyde emission from panels | |
| GB/T 4893.8-2013 | Surface wear resistance test for furniture coatings, applicable to top veneer durability |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to structural safety and finish quality; 2. GB 18584-2001: Limit of harmful substances in wood furniture, controls formaldehyde emission from panels; 3. GB/T 4893.8-2013: Surface wear resistance test for furniture coatings, applicable to top veneer durability; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
